40 CFR Appendix Table 2 to Subpart GGGGG of Part 63, Control Levels as Required by § 63.7895(a) for Tanks Managing Remediation Material With a Maximum HAP Vapor Pressure Less Than 76.6 kPa

Table 2 to Subpart GGGGG of Part 63 - Control Levels as Required by § 63.7895(a) for Tanks Managing Remediation Material With a Maximum HAP Vapor Pressure Less Than 76.6 kPa
If your tank design capacity is . . . And the maximum HAP vapor pressure of the remediation material placed in your tank
is . . .
Then your tank must use . . .
1. Less than 38 m 3 Less than 76.6 kPa Tank Level 1 controls under § 63.7895(b) .
2. At least 38 m 3 but less than 151 m 3 Less than 13.1 kPa Tank Level 1 controls under § 63.7895(b) .
3. 151 m 3 or greater Less than 0.7 kPa Tank Level 1 controls under § 63.7895(b) .
4. at least 38 m 3 but less than 151 m 3 13.1 kPa or greater Tank Level 2 controls under § 63.7895(c) .
5. 151 m 3 or greater 0.7 kPa or greater Tank Level 2 controls under § 63.7895(c)

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code

Title 40 published on 2015-08-22

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR Part 63 after this date.

  • 2017-04-06; vol. 82 # 65 - Thursday, April 6, 2017
    1. 82 FR 16736 - Mercury and Air Toxics Standards (MATS) Electronic Reporting Requirements
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Final rule.
      This final rule is effective on April 6, 2017.
      40 CFR Part 63