40 CFR Appendix Table 5 to Subpart DDDDD of Part 63, Performance Testing Requirements

Table 5 to Subpart DDDDD of Part 63 - Performance Testing Requirements

As stated in § 63.7520, you must comply with the following requirements for performance testing for existing, new or reconstructed affected sources:

To conduct a performance test for the following pollutant . . . You must. . . Using, as appropriate . . .
1. Filterable PM a. Select sampling ports location and the number of traverse points Method 1 at 40 CFR part 60 , appendix A-1 of this chapter.
b. Determine velocity and volumetric flow-rate of the stack gas Method 2, 2F, or 2G at 40 CFR part 60 , appendix A-1 or A-2 to part 60 of this chapter.
c. Determine oxygen or carbon dioxide concentration of the stack gas Method 3A or 3B at 40 CFR part 60 , appendix A-2 to part 60 of this chapter, or ANSI/ASME PTC 19.10-1981. a
d. Measure the moisture content of the stack gas Method 4 at 40 CFR part 60 , appendix A-3 of this chapter.
e. Measure the PM emission concentration Method 5 or 17 (positive pressure fabric filters must use Method 5D) at 40 CFR part 60 , appendix A-3 or A-6 of this chapter.
f. Convert emissions concentration to lb per MMBtu emission rates Method 19 F-factor methodology at 40 CFR part 60 , appendix A-7 of this chapter.
2. TSM a. Select sampling ports location and the number of traverse points Method 1 at 40 CFR part 60 , appendix A-1 of this chapter.
b. Determine velocity and volumetric flow-rate of the stack gas Method 2, 2F, or 2G at 40 CFR part 60 , appendix A-1 or A-2 of this chapter.
c. Determine oxygen or carbon dioxide concentration of the stack gas Method 3A or 3B at 40 CFR part 60 , appendix A-1 of this chapter, or ANSI/ASME PTC 19.10-1981. a
d. Measure the moisture content of the stack gas Method 4 at 40 CFR part 60 , appendix A-3 of this chapter.
e. Measure the TSM emission concentration Method 29 at 40 CFR part 60 , appendix A-8 of this chapter
f. Convert emissions concentration to lb per MMBtu emission rates Method 19 F-factor methodology at 40 CFR part 60 , appendix A-7 of this chapter.
3. Hydrogen chloride a. Select sampling ports location and the number of traverse points Method 1 at 40 CFR part 60 , appendix A-1 of this chapter.
b. Determine velocity and volumetric flow-rate of the stack gas Method 2, 2F, or 2G at 40 CFR part 60 , appendix A-2 of this chapter.
c. Determine oxygen or carbon dioxide concentration of the stack gas Method 3A or 3B at 40 CFR part 60 , appendix A-2 of this chapter, or ANSI/ASME PTC 19.10-1981. a
d. Measure the moisture content of the stack gas Method 4 at 40 CFR part 60 , appendix A-3 of this chapter.
e. Measure the hydrogen chloride emission concentration Method 26 or 26A (M26 or M26A) at 40 CFR part 60 , appendix A-8 of this chapter.
f. Convert emissions concentration to lb per MMBtu emission rates Method 19 F-factor methodology at 40 CFR part 60 , appendix A-7 of this chapter.
4. Mercury a. Select sampling ports location and the number of traverse points Method 1 at 40 CFR part 60 , appendix A-1 of this chapter.
b. Determine velocity and volumetric flow-rate of the stack gas Method 2, 2F, or 2G at 40 CFR part 60 , appendix A-1 or A-2 of this chapter.
c. Determine oxygen or carbon dioxide concentration of the stack gas Method 3A or 3B at 40 CFR part 60 , appendix A-1 of this chapter, or ANSI/ASME PTC 19.10-1981. a
d. Measure the moisture content of the stack gas Method 4 at 40 CFR part 60 , appendix A-3 of this chapter.
e. Measure the mercury emission concentration Method 29, 30A, or 30B (M29, M30A, or M30B) at 40 CFR part 60 , appendix A-8 of this chapter or Method 101A at 40 CFR part 61 , appendix B of this chapter, or ASTM Method D6784. a
f. Convert emissions concentration to lb per MMBtu emission rates Method 19 F-factor methodology at 40 CFR part 60 , appendix A-7 of this chapter.
5. CO a. Select the sampling ports location and the number of traverse points Method 1 at 40 CFR part 60 , appendix A-1 of this chapter.
b. Determine oxygen concentration of the stack gas Method 3A or 3B at 40 CFR part 60 , appendix A-3 of this chapter, or ASTM D6522-00 (Reapproved 2005), or ANSI/ASME PTC 19.10-1981. a
c. Measure the moisture content of the stack gas Method 4 at 40 CFR part 60 , appendix A-3 of this chapter.
d. Measure the CO emission concentration Method 10 at 40 CFR part 60 , appendix A-4 of this chapter. Use a measurement span value of 2 times the concentration of the applicable emission limit.

a Incorporated by reference, see § 63.14.

[ 76 FR 15664, Mar. 21, 2011, as amended at 78 FR 7200, Jan. 31, 2013; 80 FR 72825, Nov. 20, 2015]

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code

Title 40 published on 2015-08-22

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR Part 63 after this date.

  • 2017-02-22; vol. 82 # 34 - Wednesday, February 22, 2017
    1. 82 FR 11334 - National Emission Standards for Hazardous Air Pollutants: Publicly Owned Treatment Works
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Proposed rule; extension of comment period.
      The public comment period for the proposed rule published in the Federal Register on December 27, 2016 (81 FR 95352), is being extended. Written comments must be received on or before March 29, 2017.
      40 CFR Part 63