40 CFR Appendix Table 6 to Subpart SSSSS of Part 63, Initial Compliance With Work Practice Standards

Table 6 to Subpart SSSSS of Part 63 - Initial Compliance With Work Practice Standards

As stated in § 63.9806, you must show initial compliance with the work practice standards for affected sources according to the following table:

For each . . . For the following standard . . . You have demonstrated initial compliance if . . .
1. Each affected source listed in Table 3 to this subpart a. Each applicable work practice standard listed in Table 3 to this subpart i. You have selected a method for performing each of the applicable work practice standards listed in Table 3 to this subpart; and
ii. You have included in your Initial Notification a description of the method selected for complying with each applicable work practice standard, as required by § 63.9(b) ; and
iii. You submit a signed statement with the Notification of Compliance Status that you have implemented the applicable work practice standard listed in Table 3 to this subpart; and
iv. You have described in your OM&M plan the method for complying with each applicable work practice standard specified in Table 3 to this subpart.
2. Each basket or container that is used for holding fired refractory shapes in an existing shape preheater and autoclave during the pitch impregnation process a. Control POM emissions from any affected shape preheater i. You have implemented at least one of the work practice standards listed in item 1 of Table 3 to this subpart; and
ii. You have established a system for recording the date and cleaning method for each time you clean an affected basket or container.
3. Each affected new or existing pitch working tank Control POM emissions You have captured and vented emissions from the affected pitch working tank to the device that is used to control emissions from an affected defumer or coking oven, or to a thermal or catalytic oxidizer that is comparable to the control device used on an affected defumer or coking oven.
4. Each new or existing chromium refractory products kiln Minimize fuel-based HAP emissions You use natural gas, or equivalent, as the kiln fuel.
5. Each existing clay refractory products kiln Minimize fuel-based HAP emissions You use natural gas, or equivalent, as the kiln fuel.

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code

Title 40 published on 10-May-2017 04:28

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR Part 63 after this date.

  • 2017-05-11; vol. 82 # 90 - Thursday, May 11, 2017
    1. 82 FR 21927 - Delegation of New Source Performance Standards and National Emission Standards for Hazardous Air Pollutants for the States of Arizona and Nevada
      GPO FDSys XML | Text
      ENVIRONMENTAL PROTECTION AGENCY
      Direct final rule.
      This rule is effective on July 10, 2017 without further notice, unless EPA receives adverse comments by June 12, 2017. If we receive such comments, we will publish a timely withdrawal in the Federal Register to notify the public that this direct final rule will not take effect.
      40 CFR Parts 60, 61 and 63

Pages