This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office] .
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
United States Code U.S. Code: Title 42 - THE PUBLIC HEALTH AND WELFARE
Title 40 published on 09-Jun-2018 05:24
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR Part 65 after this date.
2013-06-25; vol. 78 # 122 - Tuesday, June 25, 2013 78 FR 37973 - Change of Address for Region 7; Technical Correction
GPO FDSys XML | Text Additional Documents ENVIRONMENTAL PROTECTION AGENCY Final rule; technical amendment. This final rule is effective June 25, 2013. 40 CFR Parts 1, 2, 21, 35, 52, 59, 60, 61, 62, 63, 65, 82, 147, 282, 374, 707, and 763 Summary EPA is amending its regulations to reflect a change in address for EPA's Region 7 office. This action is editorial in nature and is intended to provide accuracy and clarity to the Agency's regulations.
2012-06-18; vol. 77 # 117 - Monday, June 18, 2012 77 FR 36248 - National Uniform Emission Standards for Storage Vessel and Transfer Operations, Equipment Leaks, and Closed Vent Systems and Control Devices; and Revisions to the National Uniform Emission Standards General Provisions
GPO FDSys XML | Text Additional Documents ENVIRONMENTAL PROTECTION AGENCY Extension of public comment period. Comments must be received on or before September 24, 2012. 40 CFR Part 65 Summary On March 26, 2012, the EPA proposed the National Uniform Emission Standards for Storage Vessels and Transfer Operations, Equipment Leaks, and Closed Vent Systems and Control Devices, herein referred to as Uniform Standards. The EPA is extending the deadline for written comments on the proposed amendments by 90 days to September 24, 2012. The EPA received requests for this extension from the American Petroleum Institute (API) and the American Chemistry Council (ACC). API and ACC each requested an extension in order to fully evaluate the potential impact of the Uniform Standards on subparts applicable to the refining and chemical industries, respectively. The EPA finds these requests to be reasonable due to the multiple source categories potentially affected by this action.
2012-03-26; vol. 77 # 58 - Monday, March 26, 2012 77 FR 17898 - National Uniform Emission Standards for Storage Vessel and Transfer Operations, Equipment Leaks, and Closed Vent Systems and Control Devices; and Revisions to the National Uniform Emission Standards General Provisions
GPO FDSys XML | Text Additional Documents ENVIRONMENTAL PROTECTION AGENCY Proposed rule. Comments. Comments must be received on or before June 25, 2012. Public Hearing. If anyone contacts the EPA by April 10, 2012 requesting to speak at a public hearing, the EPA will hold a public hearing on or about April 25, 2012. 40 CFR Part 65 Summary The EPA is proposing National Uniform Emission Standards for Storage Vessels and Transfer Operations, Equipment Leaks and Control Devices, herein referred to as Uniform Standards. The EPA is also proposing supplemental revisions to the National Uniform Emission Standards General Provisions, which were proposed with the National Uniform Emission Standards for Heat Exchange Systems, signed by the EPA Administrator on November 30, 2011. The proposed Uniform Standards would be referenced, as appropriate, in future revisions to new source performance standards and national emission standards for hazardous air pollutants for individual source categories that are part of the chemical manufacturing and refining industries that have storage vessels and transfer operations, equipment leaks or control devices used to control process vents from reactors, distillation and other operations, as well as from emissions from storage vessels, transfer operations and equipment leaks that are routed to control devices. Establishing these Uniform Standards is consistent with the objectives of Executive Order 13563, Improving Regulation and Regulatory Review, issued on January 18, 2011. In the future, as we periodically review and, if necessary, revise new source performance standards and national emission standards for hazardous air pollutants, as required by the Clean Air Act, we can direct those rulemakings to the proposed Uniform Standards, provided the Uniform Standards meet the applicable statutory stringency requirements for the specific rulemaking. The proposed Uniform Standards would ensure consistency and streamline recordkeeping and reporting requirements for facilities with storage vessels and transfer operations, equipment leaks and process vents that must comply with multiple regulations.
2012-01-06; vol. 77 # 4 - Friday, January 6, 2012 77 FR 960 - National Emission Standards for Hazardous Air Pollutants From Petroleum Refineries; National Uniform Emission Standards for Heat Exchange Systems
GPO FDSys XML | Text Additional Documents ENVIRONMENTAL PROTECTION AGENCY Proposed rule. Comments. Written comments must be received on or before March 6, 2012. Public Hearing. If anyone contacts the EPA by January 23, 2012 requesting to speak at a public hearing, a public hearing will be held on February 6, 2012. 40 CFR Parts 9, 63 and 65 Summary This action proposes amendments to the heat exchange system requirements of the national emission standards for hazardous air pollutants (NESHAP) for petroleum refineries in response to a petition for reconsideration filed by the American Petroleum Institute on the maximum achievable control technology standards we promulgated on October 28, 2009. We also are creating national uniform standards for heat exchange systems, largely based on the heat exchange system provisions that we adopted for petroleum refineries, and accompanying general provisions. We are proposing to revise the existing Petroleum Refinery NESHAP to cross-reference the uniform standard to allow an alternative option for complying with the standards for heat exchange systems. The proposed uniform standards would allow refiners to reduce monitoring frequency and burden by meeting a lower leak definition. If finalized, these national uniform standards would also be referenced, as appropriate, as we revise in the future NESHAP or new source performance standards for individual source categories that have heat exchange systems. Establishing a uniform standard for heat exchange systems is consistent with the objectives of Executive Order 13563, Improving Regulation and Regulatory Review, issued on January 18, 2011. We are also proposing other clarifications and technical corrections to the Petroleum Refineries NESHAP.
