49 CFR § 396.19 - Inspector qualifications.
(1) Understand the inspection criteria set forth in part 393 and appendix A to this part and can identify defective components;
(2) Are knowledgeable of and have mastered the methods, procedures, tools and equipment used when performing an inspection; and
(3) Are capable of performing an inspection by reason of experience, training, or both as follows:
(i) Successfully completed a Federal-or State-sponsored training program or have a certificate from a State or Canadian Province that qualifies the individuals to perform commercial motor vehicle safety inspections, or
(ii) Have a combination of training or experience totaling at least 1 year. Such training or experience may consist of:
(A) Participation in a commercial motor vehicle manufacturer-sponsored training program or similar commercial training program designed to train students in commercial motor vehicle operation and maintenance;
(C) Experience as a mechanic or inspector in commercial motor vehicle maintenance at a commercial garage, fleet leasing company, or similar facility; or
(b) Motor carriers and intermodal equipment providers must retain evidence of that individual's qualifications under this section. They must retain this evidence for the period during which that individual is performing annual motor vehicle inspections for the motor carrier or intermodal equipment provider, and for one year thereafter. However, motor carriers and intermodal equipment providers do not have to maintain documentation of inspector qualifications for those inspections performed as part of a State periodic inspection program.
The following state regulations pages link to this page.
- Idaho Admin. Code r. 39.03.03.050 - 050 - SAFETY INSPECTION REQUIREMENTS FOR PERMITTED VEHICLES AND/OR LOADS.
- Nev. Admin. Code § 483.1229 - 483.1229 - Vehicles used to administer skills tests: Annual inspection; requirements.
- Nev. Admin. Code § 483.795 - 483.795 - Vehicles used for training drivers: Inspection; requirements.