49 CFR Part 172 - HAZARDOUS MATERIALS TABLE, SPECIAL PROVISIONS, HAZARDOUS MATERIALS COMMUNICATIONS, EMERGENCY RESPONSE INFORMATION, TRAINING REQUIREMENTS, AND SECURITY PLANS

PHMSA is extending the comment period for an advance notice of proposed rulemaking that was published in the Federal Register on January 18, 2017. In response to stakeholder requests, the comment period will be extended for an additional 60 days, from March 20, 2017 to May 19, 2017.

PHMSA is considering revising the Hazardous Materials Regulations (HMR) to establish vapor pressure limits for unrefined petroleum-based products and potentially all Class 3 flammable liquid hazardous materials that would apply during the transportation of the products or materials by any mode. PHMSA is currently assessing the merits of a petition for rulemaking submitted by the Attorney General of the State of New York regarding vapor pressure standards for the transportation of crude oil. The petition requests that PHMSA implement a Reid Vapor Pressure (RVP) limit less than 9.0 pounds per square inch (psi) for crude oil transported by rail. PHMSA will use the comments in response to this ANPRM to help assess and respond to the petition and to evaluate any other potential regulatory actions related to sampling and testing of crude oil and other Class 3 hazardous materials. PHMSA will also evaluate the potential safety benefits and costs of utilizing vapor pressure thresholds within the hazardous materials classification process for unrefined petroleum-based products and Class 3 hazardous materials.

In consultation with the Federal Aviation Administration (FAA), PHMSA proposes to amend the Hazardous Materials Regulations (HMR) to align with current international standards for the air transportation of hazardous materials. The proposals in this rule would amend certain special provisions, packaging requirements, notification of pilot-in-command (NOTOC) requirements, and exceptions for passengers and crew members. In addition to harmonization with international standards, several of the proposals in this rule are responsive to petitions for rulemaking submitted by the regulated community. PHMSA invites all interested persons to provide comments regarding these proposed revisions.

PHMSA is publishing this advance notice of proposed rulemaking (ANPRM) in response to the Protecting our Infrastructure of Pipelines and Enhancing Safety (PIPES) Act of 2016, which reauthorizes the pipeline safety program and requires a number of reports and mandates. The PIPES Act requires PHMSA to take regulatory actions to establish minimum safety standards for underground natural gas storage facilities; to update the minimum safety standards for permanent, small scale liquefied natural gas pipeline facilities; and to publish an ANPRM to address a petition for rulemaking proposing hazardous materials regulations related to the marking of identification numbers on cargo tanks. This ANPRM specifically addresses the PIPES Act requirement applicable to the petition for rulemaking related to the marking of identification numbers on cargo tanks. PHMSA will consider the comments, data, and information received in any future action related to the petition.

The Pipeline and Hazardous Materials Safety Administration (PHMSA) proposes to amend the Hazardous Materials Regulations (HMR) to maintain consistency with international regulations and standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the HMR with recent changes made to the International Maritime Dangerous Goods Code, the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air, and the United Nations Recommendations on the Transport of Dangerous Goods—Model Regulations. Additionally, PHMSA proposes several amendments to the HMR that result from coordination with Canada under the U.S.-Canada Regulatory Cooperation Council.

The Pipeline and Hazardous Materials Safety Administration (PHMSA) is proposing to amend the Hazardous Materials Regulations to revise certain requirements applicable to the manufacture, use, and requalification of DOT-specification cylinders. PHMSA is taking this action in response to petitions for rulemaking submitted by stakeholders and to agency review of the compressed gas cylinders regulations. Specifically, PHMSA is proposing to incorporate by reference or update the references to several Compressed Gas Association publications, amend the filling requirements for compressed and liquefied gases, expand the use of salvage cylinders, and revise and clarify the manufacture and requalification requirements for cylinders.

In response to petitions for rulemaking submitted by the regulated community, PHMSA proposes to amend the Hazardous Materials Regulations (HMR; 49 CFR parts 171 through 180) to update, clarify, or provide relief from miscellaneous regulatory requirements. Specifically, PHMSA is proposing amendments that include, but are not limited to, the following: Incorporating by Reference (IBR) multiple publications from both the Compressed Gas Association (CGA) and the Chlorine Institute; addressing inconsistencies with domestic and international labels and placards; permitting alternative testing for aerosols; no longer mandating that excepted quantities comply with the emergency response telephone requirement; allowing electronic signatures for Environmental Protection Agency (EPA) manifest forms; and no longer requiring the service pressure to be marked on Department of Transportation (DOT) 8 and 8L cylinders.

In this final rule, the Pipeline and Hazardous Materials Safety Administration (PHMSA) is amending the Hazardous Materials Regulations (HMR) to make miscellaneous amendments in order to update and clarify certain regulatory requirements. These amendments are designed to promote safer transportation practices, address petitions for rulemaking, respond to National Transportation Safety Board (NTSB) Safety Recommendations, facilitate international commerce, make editorial corrections, and simplify the regulations. The amendments in this rulemaking include, but are not limited to, removing the packing group (PG) II designation for certain organic peroxides, self-reactive substances, and explosives; incorporating requirements for trailers of manifolded acetylene cylinders; providing requirements to allow for shipments of damaged wet electric batteries; and revising the requirements for the packaging of nitric acid, testing of pressure relief devices on cargo tanks, and shipments of black or smokeless powder for small arms.

As required by the Moving Ahead for Progress in the 21st Century Act (MAP-21), the Pipeline and Hazardous Materials Safety Administration is amending the Hazardous Materials Regulations to adopt provisions contained in certain widely-used or long-standing special permits that have an established safety record. The adopted amendments are intended to provide wider access to the regulatory flexibility offered in special permits and eliminate the need for numerous renewal requests. The adopted amendments will also reduce paperwork burdens and facilitate commerce while maintaining an appropriate level of safety. PHMSA conducted an extensive analysis of all active special permits and codified, as appropriate, those special permits deemed suitable in this rulemaking.

The Pipeline and Hazardous Materials Safety Administration (PHMSA) is amending the Hazardous Materials Regulations by establishing standards for the safe transportation of explosives on cargo tank motor vehicles and multipurpose bulk trucks transporting materials for blasting operations. This rulemaking is responsive to two petitions for rulemaking submitted by industry representatives: P-1557, concerning the continued use of renewal applications, and P-1583, concerning the incorporation of an industry standard publication. Further, developing these requirements provides wider access to the regulatory flexibility currently only offered by special permits and competent authorities. The requirements of this final rule mirror the majority of provisions contained in nine widely-used longstanding special permits that have established safety records. These requirements eliminate the need for future renewal requests, thus reducing paperwork burdens and facilitating commerce while maintaining a commensurate level of safety. This final rule authorizes the transportation of certain explosives, ammonium nitrates, ammonium nitrate emulsions, and other specific hazardous materials in both non-bulk and bulk packagings, which are not otherwise authorized under current regulations. These hazardous materials are used in blasting operations on cargo tank motor vehicles and specialized vehicles, known as multipurpose bulk trucks, which are used as mobile work platforms to create blends of explosives that are unique to each blast site. Finally, this rulemaking addresses the construction of new multipurpose bulk trucks.

This final rule corrects editorial errors, makes minor regulatory changes and, in response to requests for clarification, improves the clarity of certain provisions in the Hazardous Materials Regulations. The intended effect of this rule is to enhance the accuracy and reduce misunderstandings of the regulations. The amendments contained in this rule are non-substantive changes and do not impose new requirements.

On May 8, 2015, the Pipeline and Hazardous Materials Safety Administration, in coordination with the Federal Railroad Administration (FRA), published a final rule entitled “Hazardous Materials: Enhanced Tank Car Standards and Operational Controls for High-Hazard Flammable Trains,” which adopted requirements designed to reduce the consequences and, in some instances, reduce the probability of accidents involving trains transporting large quantities of Class 3 flammable liquids. The Hazardous Materials Regulations provide a person the opportunity to appeal a PHMSA action, including a final rule. PHMSA received six appeals regarding the final rule, one of which was withdrawn. This document responds to the five remaining appeals submitted by the Dangerous Goods Advisory Council (DGAC), American Chemistry Council (ACC), Association of American Railroads (AAR), American Fuel & Petrochemical Manufacturers (AFPM), and jointly the Umatilla, Yakama, Warm Springs, and Nez Perce tribes (Columbia River Treaty Tribes) and the Quinault Indian Nation (Northwest Treaty Tribes).

In this final rule, the Pipeline and Hazardous Materials Safety Administration (PHMSA), in coordination with the Federal Railroad Administration (FRA), is adopting requirements designed to reduce the consequences and, in some instances, reduce the probability of accidents involving trains transporting large quantities of flammable liquids. The final rule defines certain trains transporting large volumes of flammable liquids as “high-hazard flammable trains” (HHFT) and regulates their operation in terms of speed restrictions, braking systems, and routing. The final rule also adopts safety improvements in tank car design standards, a sampling and classification program for unrefined petroleum-based products, and notification requirements. These operational and safety improvements are necessary to address the unique risks associated with the growing reliance on trains to transport large quantities of flammable liquids. They incorporate recommendations from the National Transportation Safety Board (NTSB) and from the public comments, and are supported by a robust economic impact analysis.

PHMSA is extending for modes of transportation other than air the mandatory compliance date of a final rule published on August 6, 2014, under Docket No. HM-224F from February 6, 2015, until August 7, 2015. This extension is made in response to formal comments received from multiple stakeholders outlining challenges faced by the regulated community in fully implementing the provisions of the final rule by the February 6, 2015 mandatory compliance date.

As required by the Moving Ahead for Progress in the 21st Century Act (MAP-21), the Pipeline and Hazardous Materials Safety Administration is proposing to amend the Hazardous Materials Regulations to adopt provisions contained in certain widely-used or long-standing special permits that have an established safety record. The proposed revisions are intended to provide wider access to the regulatory flexibility offered in special permits and eliminate the need for numerous renewal requests, thus reducing paperwork burdens and facilitating commerce while maintaining an appropriate level of safety. PHMSA conducted an extensive analysis of all active special permits and, in this rulemaking, those special permits deemed suitable are being proposed for adoption. PHMSA is inviting all interested persons to provide comments on both those special permits deemed suitable and proposed to be adopted into the HMR and those that are deemed not suitable for adoption. In addition, PHMSA is also requesting comments on a proposed requirement for special permit applicants to include regulatory text in their applications, when appropriate.

PHMSA proposes to make miscellaneous amendments to the Hazardous Materials Regulations to update and clarify certain regulatory requirements. These proposed amendments are designed to promote safer transportation practices, address petitions for rulemaking, respond to National Transportation Safety Board (NTSB) Safety Recommendations, facilitate international commerce, make editorial corrections, and simplify the regulations. The proposed provisions in this rulemaking include, but are not limited to, removing the packing group (PG) II designation for certain organic peroxides, self-reactive substances and explosives, incorporating requirements for trailers of manifolded acetylene cylinders, and providing requirements to allow for shipments of damaged wet electric batteries. In addition, this rulemaking proposes to revise the requirements for the packaging of nitric acid, testing of pressure relief devices on cargo tanks, and shipments of black or smokeless powder for small arms.

PHMSA is amending the Hazardous Materials Regulations to maintain alignment with international standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the Hazardous Materials Regulations with recent changes made to the International Maritime Dangerous Goods (IMDG) Code, the International Civil Aviation Organization's Technical Instructions (ICAO TI) for the Safe Transport of Dangerous Goods by Air, the United Nations Recommendations on the Transport of Dangerous Goods (UN Model Regulations) and subsequently address three petitions for rulemaking.

PHMSA proposes to amend the Hazardous Materials Regulations to maintain alignment with international standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the Hazardous Materials Regulations with recent changes made to the International Maritime Dangerous Goods Code, the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air, the United Nations Recommendations on the Transport of Dangerous Goods—Model Regulations and subsequently address three petitions for rulemaking.

PHMSA, in consultation with the Federal Aviation Administration (FAA), is modifying the requirements governing the transportation of lithium cells and batteries. This final rule revises hazard communication and packaging provisions for lithium batteries and harmonizes the Hazardous Materials Regulations (HMR) with applicable provisions of the United Nations (UN) Model Regulations, the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air (ICAO Technical Instructions) and the International Maritime Dangerous Goods (IMDG) Code.

The Pipeline and Hazardous Materials Safety Administration (PHMSA or we), in coordination with the Federal Railroad Administration (FRA), is proposing: new operational requirements for certain trains transporting a large volume of Class 3 flammable liquids; improvements in tank car standards; and revision of the general requirements for offerors to ensure proper classification and characterization of mined gases and liquids. These proposed requirements are designed to lessen the frequency and consequences of train accidents/incidents (train accidents) involving certain trains transporting a large volume of flammable liquids. The growing reliance on trains to transport large volumes of flammable liquids poses a significant risk to life, property, and the environment. These significant risks have been highlighted by the recent instances of trains carrying crude oil that derailed in Casselton, North Dakota; Aliceville, Alabama; and Lac-Mégantic, Quebec, Canada. The proposed changes also address National Transportation Safety Board (NTSB) safety recommendations on the accurate classification and characterization of such commodities, enhanced tank car construction, and rail routing.

The Pipeline and Hazardous Materials Safety Administration is proposing to amend the Hazardous Materials Regulations by establishing standards for the safe transportation of bulk explosives. This rulemaking would be responsive to two petitions for rulemaking submitted by industry representatives: P-1557 concerning the continued use of renewal applications, and P-1583 concerning the incorporation of an industry standard publication. Further, developing these requirements would provide wider access to the regulatory flexibility currently only offered by special permit and competent authorities. The requirements of this proposed rule would mirror the majority of provisions contained in nine widely used or longstanding special permits that have established safety records. These proposed revisions are intended to eliminate the need for future renewal requests, thus reducing paperwork burdens and facilitating commerce while maintaining an appropriate level of safety. As proposed, the requirements would authorize the transportation of certain explosives, ammonium nitrates, ammonium nitrate emulsions, and other specific hazardous materials in bulk packagings, which are not otherwise authorized under the regulations. These hazardous materials are used in blasting operations on specialized vehicles, known as multipurpose bulk trucks, which are used as mobile work platforms to create blends of explosives that are unique for each blast site. Finally, this rulemaking addresses the construction of new multipurpose bulk trucks.

PHMSA, in coordination with the Nuclear Regulatory Commission (NRC), is amending requirements in the Hazardous Materials Regulations (HMR) governing the transportation of Class 7 (radioactive) materials based on recent changes contained in the International Atomic Energy Agency (IAEA) publication “Regulations for the Safe Transport of Radioactive Material, 2009 Edition, IAEA Safety Standards Series No. TS-R-1.” The purposes of this rulemaking are to harmonize requirements of the HMR with international standards for the transportation of Class 7 (radioactive) materials and update, clarify, correct, or provide relief from certain regulatory requirements applicable to the transportation of Class 7 (radioactive) materials.

The Pipeline and Hazardous Materials Safety Administration is amending the Hazardous Materials Regulations (HMR) to adopt provisions contained in certain widely used or longstanding special permits and certain competent authority approvals (“approvals”) that have established safety records. Special permits allow a company or individual to package or ship a hazardous material in a manner that varies from the regulations provided an equivalent level of safety is maintained. An approval is a written consent (document) required under an international standard (i.e., International Maritime Dangerous Goods (IMDG) Code, International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air (ICAO TI)), or is specifically provided for in the HMR, and is issued by the Associate Administrator for Hazardous Materials Safety. These revisions are intended to provide wider access to the regulatory flexibility offered in special permits and approvals and eliminate the need for numerous renewal requests, reducing paperwork burdens and facilitating commerce while maintaining an appropriate level of safety.

This final rule corrects editorial errors and amends certain requirements in response to administrative appeals submitted by persons affected by certain final rules published in the Federal Register .

This final rule corrects editorial errors, makes minor regulatory changes and, in response to requests for clarification, improves the clarity of certain provisions in the Hazardous Materials Regulations (HMR). The intended effect of this rule is to enhance the accuracy and reduce misunderstandings of the regulations. The amendments contained in this rule are non-substantive changes and do not impose new requirements.

The Pipeline and Hazardous Materials Safety Administration is amending the Hazardous Materials Regulations applicable to air bag inflators, air bag modules, and seat-belt pretensioners. The revisions incorporate the provisions of two special permits into the regulations. In addition, PHMSA is amending the current approval and documentation requirements for a material classified as a UN3268 air bag inflator, air bag module, or seat-belt pretensioner. These revisions are intended to reduce the regulatory burden on the automotive industry and facilitate commerce, while continuing to maintain an equivalent level of safety.

PHMSA is revising the Hazardous Materials Regulations applicable to the approval of Division 1.4G consumer fireworks (UN0336 Fireworks) and establishing DOT-approved fireworks certification agencies that provide an alternative to the approval process for Division 1.4G consumer fireworks. PHMSA is also reformatting the procedural regulations pertaining to certification agencies. These actions clarify regulations with respect to PHMSA's fireworks approval process and provide regulatory flexibility in seeking authorization for the transportation of Division 1.4G consumer fireworks.

PHMSA is amending the Hazardous Materials Regulations (HMR) to make miscellaneous amendments to update and clarify certain regulatory requirements. These amendments promote safer transportation practices, eliminate unnecessary regulatory requirements, address a petition for rulemaking, incorporate a special permit into the HMR, facilitate international commerce, and simplify the regulations. These amendments also update various entries in the Hazardous Materials Table (HMT) and corresponding special provisions, clarify the lab pack requirements for temperature-controlled materials, and require hazmat employers to make hazmat employee training records available upon request to an authorized official of the Department of Transportation (DOT) or an entity explicitly granted authority to enforce the HMR.

PHMSA is amending the Hazardous Materials Regulations in response to petitions for rulemaking submitted by the regulated community to update, clarify, or provide relief from miscellaneous regulatory requirements. Specifically, PHMSA is amending the recordkeeping and package marking requirements for third-party labs and manufacturers to assure the traceability of packaging; removing the listing for “NA1203, Gasohol, gasoline mixed with ethyl alcohol, with not more than 10% alcohol”; harmonizing internationally and providing a limited quantity exception for Division 4.1, Self-reactive solids and Self-reactive liquids Types B through F; allowing smokeless powder classified as a Division 1.4C material to be reclassified as a Division 4.1 material; and providing greater flexibility by allowing the Dangerous Cargo Manifest to be in locations designated by the master of the vessel besides “on or near the vessel's bridge” while the vessel is in a United States port.

The Pipeline and Hazardous Materials Safety Administration is proposing to amend the Hazardous Materials Regulations to incorporate provisions contained in certain widely used or longstanding special permits and certain competent authority approvals (“approvals”) that have established safety records. Special permits allow a company or individual to package or ship a hazardous material in a manner that varies from the regulations provided an equivalent level of safety is maintained. An approval is a written consent (document) required under an international standard (i.e., International Maritime Dangerous Goods (IMDG) Code, International Civil Aviation Organization (ICAO)), or is specifically provided for in the HMR, and is issued by the Associate Administrator for Hazardous Materials Safety. These proposed revisions are intended to provide wider access to the regulatory flexibility offered in special permits and approvals and eliminate the need for numerous renewal requests, reducing paperwork burdens and facilitating commerce while maintaining an appropriate level of safety. Additionally, this rulemaking will address three petitions for rulemaking regarding the continued use of renewal applications for long standing special permits.

This final rule corrects editorial errors, makes minor regulatory changes and, in response to requests for clarification, improves the clarity of certain provisions in the Hazardous Materials Regulations. The intended effect of this rule is to enhance the accuracy and reduce misunderstandings of the regulations. The amendments contained in this rule are non-substantive changes and do not impose new requirements.

PHMSA is proposing to revise the Hazardous Materials Regulations applicable to the approval of Division 1.4G consumer fireworks (UN0336 Fireworks) and establish DOT-approved fireworks certification agencies that will provide an alternative to the approval process for Division 1.4G consumer fireworks. PHMSA is also proposing to revise procedural regulations pertaining to certification agencies. These proposed actions, if adopted, will clarify regulations with respect to PHMSA's fireworks approval process and provide regulatory flexibility in seeking authorization for the transportation of Division 1.4G consumer fireworks.

PHMSA proposes to amend the Hazardous Materials Regulations to maintain alignment with international standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the Hazardous Materials Regulations with recent changes made to the International Maritime Dangerous Goods Code, the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air, and the United Nations Recommendations on the Transport of Dangerous Goods—Model Regulations and subsequently address a petition for rulemaking.

The Pipeline and Hazardous Materials Safety Administration is amending the Hazardous Materials Regulations to incorporate provisions contained in certain widely used or longstanding rail special permits that have general applicability and established safety records. Special permits allow a company or an individual to package or ship a hazardous material in a manner that varies from the regulations provided an equivalent level of safety is maintained. Incorporating the special permits discussed in this rulemaking will provide users of the regulations with wider access to the regulatory flexibility offered in these special permits, eliminate the need for numerous renewal requests, reduce paperwork burdens, and facilitate commerce while maintaining an appropriate level of safety. This rulemaking will also respond to two petitions for rulemaking, P-1497, concerning the use of electronic shipping papers, and P-1567, concerning the removal of the Association of American Railroad's AAR-600 portable tank program for previously adopted standards that meet or exceed the AAR-600 requirements.

On April 5, 2010, PHMSA issued an Advance Notice of Proposed Rulemaking (ANPRM) in the Federal Register [75 FR 17111] under Docket No. PHMSA-2009-0241 (HM-242) soliciting comments on whether PHMSA should consider harmonization of the Hazardous Materials Regulations (HMR; 49 CFR parts 171-180) applicable to the transportation of combustible liquids with the UN Recommendations, while maintaining an adequate level of safety, and posed a series of questions. The major issues being examined and addressed are: Safety (hazard communication and packaging integrity); International commerce (frustration/delay of international shipments in the port area); Increased burden on domestic industry (elimination of domestic combustible liquid exceptions); and Driver Eligibility (exception from placarding which would exempt seasonal workers from the Federal Motor Carrier Safety Administration's Commercial Driver's License (CDL) and Hazmat Endorsement requirements, and the Transportation Security Administration's (TSA) fingerprinting and background check provisions). PHMSA also addressed three petitions for rulemaking in the April 5 ANPRM; two suggesting that domestic requirements for the transportation of combustible liquids should be harmonized with International standards, and one suggesting that the HMR should include more expansive domestic exceptions for shipments of combustible liquids. The issuance of this notice constitutes a decision by PHMSA to withdraw the April 5, 2010 ANPRM, and to deny the International Vessel Operators Dangerous Goods Association (IVODGA) petition, P-1498, the Dangerous Goods Advisory Council (DGAC) petition, P- 1531, and the U.S. Customer Harvesters, Inc. petition, P-1536.

The Pipeline and Hazardous Materials Safety Administration (PHMSA) is considering amendments to the Hazardous Materials Regulations (HMR) to revise certain requirements applicable to the manufacture, use, and requalification of DOT specification cylinders. PHMSA is taking this action in response to petitions for rulemaking submitted by the regulated community and a review of the regulations applicable to compressed gas cylinders. PHMSA is not proposing specific amendments to the HMR; rather, we are seeking comment on the issues discussed in the ANPRM. While this ANPRM focuses on specific petitions for rulemaking and special permits, we will accept comments on the HMR applicable to compressed gas cylinders. These comments will be combined with a retrospective review of existing requirements aimed to modify, streamline, expand, or repeal existing rules that are outmoded, ineffective, insufficient, or excessively burdensome.

This document responds to administrative appeals and solicits public comment on proposals generated as a result of certain amendments adopted in an international harmonization final rule published in the Federal Register . The final rule amended the Hazardous Materials Regulations (HMR) by revising, removing or adding proper shipping names, the hazard class of a material, packing group assignments, special provisions, packaging authorizations, packaging sections, air transport quantity limitations, and vessel stowage requirements. The amendments were necessary to align the HMR with recent revisions to international standards for the transport of hazardous materials by all modes. In this notice, PHMSA proposes to amend the HMR as a result of administrative appeals submitted in response to various amendments adopted in the January 19, 2011 final rule. This document also addresses recent actions taken by the International Civil Aviation Organization's (ICAO) Dangerous Goods Panel (DGP) regarding certain lithium ion battery-powered mobility aids (e.g., wheelchairs, travel scooters) offered by passengers for air transport. Further, this notice proposes amendments to the HMR as a result of two administrative appeals submitted by an appellant in response to a final rule published in the Federal Register , that revised shipper responsibilities related to packaging design variation, manufacturer notification, and recordkeeping requirements for certain packaging types.

In response to petitions for rulemaking submitted by the regulated community, PHMSA proposes to amend the Hazardous Materials Regulations (HMR; 49 CFR Parts 171-180) to update, clarify, or provide relief from miscellaneous regulatory requirements. Specifically, PHMSA is proposing to amend the recordkeeping and package marking requirements for third-party labs and manufacturers to assure the traceability of packaging; clarify an acceptable range in specifications for resins used in the manufacture of plastic drums and Intermediate Bulk Containers (IBCs); remove the listing for “Gasohol, gasoline mixed with ethyl alcohol, with not more than 10% alcohol, NA1203”; harmonize internationally and provide a limited quantity exception for Division 4.1, Self-reactive solids and Self-reactive liquids Types B through F; allow smokeless powder classified as a Division 1.4C material to be reclassified as a Division 4.1 material to relax the regulatory requirements for these materials without compromising safety; and provide greater flexibility by allowing the Dangerous Cargo Manifest to be in locations designated by the master of the vessel besides “on or near the vessel's bridge” while the vessel is in a United States port.

PHMSA proposes to make miscellaneous amendments to the Hazardous Materials Regulations to update and clarify certain regulatory requirements. These proposed amendments are designed to promote safer transportation practices; eliminate unnecessary regulatory requirements; address a petition for rulemaking; incorporate a special permit into the Hazardous Materials Regulations; facilitate international commerce; and simplify the regulations. Among other provisions, PHMSA is proposing to update various entries in the Hazardous Materials Table and corresponding special provisions, clarify the lab pack requirements for temperature-controlled materials, and revise the training requirements to require that a hazardous material employer must make hazardous materials employee training records available upon request to an authorized official of the Department of Transportation (DOT) or the Department of Homeland Security (DHS).