49 CFR Part 213, Subpart F - Inspection

To comply with the Federal Civil Penalties Inflation Adjustment Act of 1990, as amended by the Federal Civil Penalties Inflation Adjustment Act Improvements Act of 2015, FRA is adjusting the minimum, maximum, and aggravated maximum penalties it will apply when assessing a civil penalty for a violation of a railroad safety statute, regulation, or order under its authority. FRA is also adjusting the minimum penalty, ordinary maximum penalty, and aggravated maximum penalty that it will apply when assessing a civil monetary penalty for a knowing violation of the Federal hazardous material transportation laws or a regulation, special permit, order, or approval issued under those laws. The aggravated maximum penalty under the hazardous material transportation laws is available only for a violation that results in death, serious illness, or severe injury to any person or substantial destruction of property.

To comply with the Federal Civil Penalties Inflation Adjustment Act of 1990, as amended by the Federal Civil Penalties Inflation Adjustment Act Improvements Act of 2015, FRA is adjusting the minimum, maximum, and aggravated maximum penalties that it will apply when assessing a civil penalty for a violation of a railroad safety statute, regulation, or order under its authority. In particular, FRA is increasing the minimum civil penalty per violation from $650 to $839, the ordinary maximum civil penalty per violation from $25,000 to $27,455, and the aggravated maximum civil penalty ( i.e., the maximum civil penalty per violation where a grossly negligent violation or a pattern of repeated violations has created an imminent hazard of death or injury or has caused death or injury) from $105,000 to $109,819.

FRA is amending the Federal Track Safety Standards to promote the safety of railroad operations by enhancing rail flaw detection processes. In particular, FRA is establishing minimum qualification requirements for rail flaw detection equipment operators, as well as revising requirements for effective rail inspection frequencies, rail flaw remedial actions, and rail inspection records. In addition, FRA is removing regulatory requirements concerning joint bar fracture reporting. This final rule is intended to implement section 403 of the Rail Safety Improvement Act of 2008 (RSIA).

FRA is amending the Track Safety Standards and Passenger Equipment Safety Standards to promote the safe interaction of rail vehicles with the track over which they operate under a variety of conditions at speeds up to 220 m.p.h. The final rule revises standards for track geometry and safety limits for vehicle response to track conditions, enhances vehicle/track qualification procedures, and adds flexibility for permitting high cant deficiency train operations through curves at conventional speeds. The rule accounts for a range of vehicle types that are currently in operation, as well as vehicle types that may likely be used in future high-speed or high cant deficiency rail operations, or both. The rule is based on the results of simulation studies designed to identify track geometry irregularities associated with unsafe wheel/rail forces and accelerations, thorough reviews of vehicle qualification and revenue service test data, and consideration of international practices.

FRA is proposing to amend the Federal Track Safety Standards to promote the safety of railroad operations by enhancing rail flaw detection processes. In particular, FRA is proposing minimum qualification requirements for rail flaw detection equipment operators, as well as revisions to requirements for effective rail inspection frequencies, rail flaw remedial actions, and rail inspection records. In addition, FRA is proposing to remove regulatory requirements concerning joint bar fracture reporting. This rulemaking is intended to implement section 403 of the Rail Safety Improvement Act of 2008 (RSIA).