7 CFR 993.602 - Maximum tolerances.
prev | next
In lieu of the provision prescribed in I C of § 993.97 that the tolerance allowances prescribed therein shall be on a weight basis, the tolerance allowance percentage for each defect or group of defects in I C of § 993.97 shall be derived by dividing the number of prunes in the applicable sample affected with the applicable defect(s) by the total number of prunes in such sample.
[39 FR 30344, Aug. 22, 1974]
Effective Date Note:
Title 7 published on 2015-01-01.
No entries appear in the Federal Register after this date, for 7 CFR Part 993.