5 AAC 35.052 - Tanner crab gear storage requirements
(a) Unless
otherwise specified in this chapter, during the closed season for Tanner crab
in a registration area, Tanner crab pots must be removed from the water, except
rectangular Tanner crab pots with all bait and bait containers removed and with
all doors secured fully open, and cone or pyramid Tanner crab pots with all
bait and bait containers removed and with all doors not secured closed, may be
stored in waters
(1) of 25 fathoms or less in
depth; or
(2) deeper than 25
fathoms only for
(A) seven days following the
season closure for Tanner crab in that registration area;
(B) 72 hours following the closure of any
portion of that registration area;
(3) if the vessel owner, or the owner's
agent, has contacted, in person or by radio or telephone, the local
representative of the department at a landing port or inspection port specified
in this chapter for a specific registration area or a port specified by the
department and has requested and been granted an extension of time to remove
and store pots due to a major vessel breakdown or extreme weather
conditions.
(b) A pot
stored under this section may not have any portion of the line attaching the
pot to a buoy or buoys floating on the surface of the water at any time, except
for that portion of the line connecting the main buoy to a trailer buoy or
buoys.
(c) Provisions in this
section may be modified by regulations for specific registration
areas.
Notes
Authority:AS 16.05.251
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.