Ariz. Admin. Code § R12-15-822 - Capping of Open Wells
A. The
owner of an open well shall either install a cap on the well or abandon the
well in accordance with
R12-15-816. Within
five days after capping the well, the owner of the well shall file with the
Department a notice of well capping on a form approved by the Director which
shall include the following information:
1.
The name and address of the well owner.
2. The name and address of the person
installing the cap.
3. The well
registration number.
4. The legal
description of the location of the well.
5. The date the well was capped.
6. The method of capping.
7. The type and diameter of casing.
B. If no casing exists in an open
well, or if the integrity of the existing casing is insufficient to allow
installation of a cap, the well owner shall install a surface seal in
accordance with
R12-15-811(B)
prior to capping.
C. The owner of a
well on which a cap is installed shall make the cap tamper resistant by welding
the cap to the top of the casing by the electric arc method of welding, except
that the owner of a well may make the cap tamper resistant by securing the cap
to the top of the casing with a lock during temporary periods of well
maintenance, modification or repair, not to exceed 30 days, or at any time if
the well is a monitor well or piezometer well.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.