Ariz. Admin. Code § R18-13-1411 - Storage and Transfer Facilities; Design and Operation
An operator of a storage facility or transfer facility shall comply with all of the following design and operation requirements:
1. Design the facility so that biohazardous
medical waste is always handled and stored separately from other types of solid
waste if accepted at the facility.
2. Display prominently the universal
biohazard symbol as prescribed in
R18-13-1401.
3. Construct the storage area from smooth,
easily cleanable non-porous material that is impervious to liquids and
resistant to corrosion by disinfecting agents and hot water.
4. Protect biohazardous medical waste from
contact with water, precipitation, wind, or animals.
5. Specify in the application for facility
plan approval the maximum storage time that biohazardous medical waste will
remain at the facility. If Putrescible biohazardous medical waste will be
stored for more than 72 hours, the operator shall equip the facility with a
refrigerator to refrigerate Putrescible biohazardous medical waste. The
operator of the facility shall maintain the temperature in the refrigerator at
40° F. or less.
6. Accept
biohazardous medical waste only if it is accompanied by the tracking document.
The operator shall sign the tracking document and keep a copy of the acceptance
documentation for the period required under the USDOT requirements, as listed
in
49 CFR
172.201.
7. Accept biohazardous medical waste if it is
packaged as described in R18-13-1407. If a biohazardous medical waste container
is damaged or leaking, improperly labeled, or otherwise unacceptable, a
transfer facility operator shall do one of the following:
a. Reject the waste and return it to the
transporter or self-hauling generator.
b. Accept the waste and immediately repackage
it as prescribed in
R18-13-1407(A).
8. Clean the storage area daily.
"Clean" means to remove visible particles combined with one of the following:
a. Exposure to hot water at a temperature of
at least 180 degrees Fahrenheit for a minimum of 15 seconds.
b. Exposure to an EPA-approved chemical
disinfectant used under established protocols and regulations.
c. Any other method that the Department
determines is acceptable, if the determination of acceptability is made in
advance of the cleaning.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.