Ariz. Admin. Code § R9-14-601 - Definitions
In addition to the definitions in A.R.S. § 36-495, the following definitions apply in this Article, unless otherwise specified:
1. "Acceptance criteria" means the range of
satisfactory test results for a parameter.
2. "ADEQ" means the Arizona Department of
Environmental Quality.
3.
"Affiliate" means a business organization that:
a. Controls or has the power to control the
business organization that owns the laboratory,
b. Is controlled by or could be controlled by
the business organization that owns the laboratory, or
c. Could be controlled by a third business
organization that could also control the business organization that owns the
laboratory.
4.
"Alternate method" means an analytical test procedure or technique that is not
an approved method and for which approval is requested under
R9-14-610(C).
5. "Analyst" means an individual who performs
compliance testing at a laboratory.
6. "Analyte" means the substance or chemical
constituent being sought or measured in an analytical procedure.
7. "Applicant" means a person or persons
requesting an initial or renewal license under
R9-14-603, approval of an alternate
method or method alteration under
R9-14-610(C), or
approval of an exemption under
R9-14-615(D), and
includes, as required under A.R.S. §
36-495.03(D), the
owner and, if the owner is not the laboratory director, the laboratory
director.
8. "Approved method"
means an analytical test procedure or technique authorized by the Department to
test for the presence of a particular contaminant or characteristic and
includes:
a. An alternate method approved by
the Department under
R9-14-610(E),
and
b. An analytical test procedure
or technique currently authorized by the Department that is used with a method
alteration approved by the Department under
R9-14-610(E).
9. "ASTM" means American Society
for Testing and Materials.
10.
"Blind proficiency testing" means the Department's determination of a
laboratory analyst's ability to analyze samples correctly, accomplished by
submitting samples for testing in such a manner that the laboratory analyst is
not aware that the proficiency testing is occurring.
11. "Business organization" means an entity
such as a sole proprietorship, an unincorporated association, a corporation, a
limited liability company, a partnership, or a governmental entity.
12. "Calibration curve" means a graphical
display of the functional relationship between the instrument or analytical
device response and the analyte amount.
13. "Calibration model" means a mathematical
form for a calibration curve.
14.
"CCC" means calibration check compounds.
15. "CCV" means continuing calibration
verification standard.
16. "Client"
means a person that submits a sample to a laboratory for compliance
testing.
17. "Contaminant" means a
matter, pollutant, hazardous substance, or other substance for which a sample
is being tested.
18. "Contiguous
grounds" means real property that can be enclosed by a single unbroken boundary
line that does not enclose property owned or leased by another.
19. "Critical step" means a task in the
testing procedure that is required to be performed within a specified time
period by regulation, method, standard operating procedure, or quality
assurance plan.
20. "Current" means
up-to-date and extending to the present time.
21. "Data outlier" means a test result that
falls outside of acceptance criteria.
22. "Days" means calendar days, excluding the
day of the act, event, or default from which a designated period of time begins
to run and excluding the last day of the period if it is a Saturday, a Sunday,
or a legal holiday, in which event the period runs until the end of the next
day that is not a Saturday, a Sunday, or a legal holiday.
23. "DBCP" means
1,2-Dibromo-3-chloropropane.
24.
"DDT" means dichloro-diphenyl-trichloroethane.
25. "DOC" means dissolved organic
carbon.
26. "ECD" means electron
capture detector.
27. "EDB" means
1,2-Dibromoethane.
28. "Effluent"
means an outflow, as of a stream that flows out of a facility.
29. "EOX" means extractable organic
halides.
30. "EP" means extraction
procedure.
31. "EPA" means the
United States Environmental Protection Agency.
32. "FID" means flame ionization
detector.
33. "FL" means
fluorescence.
34. "FT-IR" means
Fourier transform infrared.
35.
"GC" means gas chromatography.
36.
"HEM" means n-Hexane extractable material.
37. "HPLC" means high performance liquid
chromatography.
38. "HRGC" means
high resolution gas chromatography.
39. "HRMS" means high resolution mass
spectrometry.
40. "ICV" means
initial calibration verification.
41.
"IDOC" means initial demonstration of
capability.
47.
"LDO" means Luminescence Measurement of Dissolved Oxygen.
48. "Level I license" means an approval
issued by the Department authorizing compliance testing of one to nine total
parameters at a laboratory.
49.
"Level II license" means an approval issued by the Department authorizing
compliance testing of 10 to 17 total parameters at a laboratory.
50. "Level III license" means an approval
issued by the Department authorizing compliance testing of more than 17 total
parameters at a laboratory.
51.
"LFB" means laboratory fortified blank.
52. "LFM" means laboratory fortified sample
matrix.
53. "Licensee" means a
person or persons to whom the Department issues a license to operate a
laboratory and includes, as required under A.R.S. §
36-495.03(D), the
owner and, if the owner is not the laboratory director, the laboratory
director.
54. "Limit of detection"
means an analyte- and matrix-specific estimate of the minimum amount of a
substance that an analytical process can reliably detect.
55. "Limit of quantitation" or "LOQ" means
the minimum levels, concentrations, or quantities of a target variable such as
an analyte that can be reported with a specific degree of confidence.
56.
"LOQ" means limit of quantitation.
57.
57. "Maximum holding
time" means the greatest number of minutes, hours, or days that a sample may be
kept between sampling and the beginning of analysis and still be considered a
valid sample for compliance testing.
58. "Method" means an analytical test
procedure or technique.
59. "Method
alteration" means a change to an established method.
60. "Method reporting limit" means the
minimum concentration of a contaminant reported after analyzing a sample in a
given parameter, determined after corrections have been made for sample
dilution and sample weight.
61.
"Mobile laboratory" means a non-stationary facility where compliance testing is
performed.
62. "MPN" means most
probable number.
63. "MRL" means
minimum reporting level.
64. "MS"
means mass spectrometry.
65. "MSE"
means microscale solvent extraction.
66. "MSRV" means Modified Semisolid
Rappaport-Vassiliadis.
69. "NTIS" means the National Technical
Information Service, which is part of the U.S. Department of
Commerce.
a. Is the source for samples with known
characteristics for proficiency testing, and
b. Assesses the acceptability of a laboratory
analyst's results from the samples with known characteristics during
proficiency testing.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.