Ariz. Admin. Code § R9-7-1440 - Medical Lasers

A. A registrant shall ensure that a Class 3 and Class 4 laser product used in the practice of medicine has a means for measuring the level of laser radiation with an error in measurement of no greater than +20%, when calibrated in accordance with the laser product manufacturer's calibration procedure.

B. A registrant shall calibrate a laser used in the practice of medicine according to the manufacturer's specified calibration procedure, at intervals that do not exceed those specified by the manufacturer.

C. In a medical facility where several medical disciplines or a number of different practitioners use Class 3b and Class 4 lasers, a registrant shall form a Laser Safety Committee to govern laser activity, establish use criteria, and approve operating procedures, as follows:

1. With regard to membership of the committee the registrant shall include at least one representative of the Nursing staff, the LSO, one management representative, and one representative of each medical discipline that uses the lasers;

2. The committee shall review actions by the LSO related to hazard evaluation and the monitoring and control of laser hazards; and

3. The committee shall approve or deny requests by potential operators and ancillary personnel to operate or assist in the operation of a laser under the direction of a licensed practitioner.

D. A registrant shall use Class 3b and Class 4 Lasers that have a guard mechanism on the switch to control patient exposure and prevent inadvertent exposure.

E. A registrant shall establish a written laser safety training program that provides a thorough understanding of established procedures for each type of laser in use and the medical procedures associated with use of the laser. The registrant shall makeprogram documentation available for Department review and, at minimum, address all of the following in the documentation:

1. Regulatory requirements and the laser classification system;

2. Fundamentals of laser operation and the significance of specular and diffuse reflections;

3. Biological effects of laser radiation on the eye and skin;

4. Non-beam hazards (for example: electrical, chemical, and reaction by-product hazards) and ionizing radiation hazards (for example: x-rays from power sources and target interactions, if applicable) of lasers; and

5. Responsibilities of management and employees regarding control measures.

Notes

Ariz. Admin. Code § R9-7-1440

New Section R9-7-1440 recodified from R12-1-1440 at 24 A.A.R. 813, effective March 22, 2018 (Supp. 18-1).