6 CCR 1007-3-265.1060 - Standards: Closed-vent systems and control devices

(a) Owners or operators of closed-vent systems and control devices subject to this subpart shall comply with the provisions of § 265.1033 of this part.

(b)

(1) The owner or operator of an existing facility who can not install a closed-vent system and control device to comply with the provisions of this subpart on the effective date that the facility becomes subject to the provisions of this subpart must prepare an implementation schedule that includes dates by which the closed-vent system and control device will be installed and in operation. The controls must be installed as soon as possible, but the implementation schedule may allow up to 30 months after the effective date that the facility becomes subject to this subpart for installation and startup.

(2) Any units that begin operation after December 21, 1990, and are subject to the provisions of this subpart when operation begins, must comply with the rules immediately (i.e., must have control devices installed and operating on startup of the affected unit); the 30-month implementation schedule does not apply.

(3) The owner or operator of any facility in existence on the effective date of a statutory or EPA regulatory amendment that renders the facility subject to this subpart shall comply with all requirements of this subpart as soon as practicable but no later than 30 months after the amendment's effective date. When control equipment required by this subpart can not be installed and begin operation by the effective date of the amendment, the facility owner or operator shall prepare an implementation schedule that includes the following information: Specific calendar dates for award of contracts or issuance of purchase orders for the control equipment, initiation of on-site installation of the control equipment, completion of the control equipment installation, and performance of any testing to demonstrate that the installed equipment meets the applicable standards of this subpart. The owner or operator shall enter the implementation schedule in the operating record or in a permanent, readily available file located at the facility.

(4) Owners and operators of facilities and units that become newly subject to the requirements of this subpart after December 8, 1997 due to an action other than those described in paragraph (b)(3) of this section must comply with all applicable requirements immediately (i.e., must have control devices installed and operating on the date the facility or unit becomes subject to this subpart; the 30-month implementation schedule does not apply).

Notes

6 CCR 1007-3-265.1060

37 CR 24, December 25, 2014, effective 3/2/2015 38 CR 11, June 10, 2015, effective 6/30/2015 39 CR 05, March 10, 2016, effective 3/30/2016 39 CR 11, June 10, 2016, effective 6/30/2016 40 CR 06, March 25, 2017, effective 4/14/2017 40 CR 11, June 10, 2017, effective 6/30/2017 40 CR 21, November 10, 2017, effective 11/30/2017 41 CR 06, March 25, 2018, effective 4/14/2018 41 CR 11, June 10, 2018, effective 6/30/2018 41 CR 24, December 25, 2018, effective 1/14/2019 42 CR 06, March 25, 2019, effective 4/14/2019 42 CR 06, March 25, 2019, effective 5/30/2019 42 CR 11, June 10, 2019, effective 6/30/2019 43 CR 12, June 25, 2020, effective 7/15/2020 44 CR 06, March 25, 2021, effective 4/14/2021 44 CR 11, June 10, 2021, effective 6/30/2021 44 CR 24, December 25, 2021, effective 1/14/2022 45 CR 11, June 10, 2022, effective 6/30/2022 45 CR 17, September 10, 2022, effective 9/10/2022 45 CR 17, September 10, 2022, effective 9/30/2022 45 CR 23, December 10, 2022, effective 1/30/2023