1 Del. Admin. Code § 704-3-3.0 - Magazine Construction
3.1 All magazine doors shall be constructed of one quarter inch (1/4") steel plate and lined with two inches (2") of hardwood. Hinges and hasps shall be attached to the doors by welding, riveting, or bolting (nuts on inside door). They shall be installed in such a manner that the hinges and hasps cannot be removed when the doors are closed and locked.
3.2 Lock Protection. Each door shall be equipped with two mortise locks; or with two padlocks fastened in separate hasps and staples; or with a combination of mortise lock and padlock; or with a mortise lock that requires two keys to open; or a three-point lock. Locks shall be tumbler proof. All padlocks shall be protected with one quarter inch (1/4") thick steel caps, constructed so as to prevent sawing or lever action on the locks or hasps.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.