The following standards, materials and practices are hereby
adopted and incorporated by reference. Copies of the following publications may
be obtained from the sources referenced below and are available for public
inspection during regular business hours at the Florida Administrative Code and
Register, R.A. Gray Building, 500 South Bronough Street, Tallahassee, FL
32399-0250 and at the Florida Department of Agriculture and Consumer Services,
Division of Consumer Services, Bureau of Fair Rides Inspection, 2005 Apalachee
Parkway, Tallahassee, Florida 32399-6500. Posting of the materials referenced
in subsections (1) through (7) on the internet for purposes of public
examination would violate federal copy right law.
(1) ASTM International Committee F-24 on
Amusement Rides and Devices Designation.
(a)
F747-23 "Standard Terminology Relating to Amusement Rides and
Devices."
(b) F770-23 "Standard
Practice for Ownership, Operation, Maintenance, and Inspection of Amusement
Rides and Devices."
(c) F1159-16e1
"Standard Practice for Design of Amusement Rides and Devices that are Outside
the Purview of Other F24 Design Standards."
(d) F1193-23 "Standard Practice for Quality,
Manufacture, and Construction of Amusement Rides and Devices."
(e) F1957-99 (2017) "Standard Test Method for
Composite Foam Hardness-Durometer Hardness."
(f) F2007-18 "Standard Practice for Design,
Manufacture, and Operation of Concession Go-Karts and Facilities."
(g) F2137-19 "Standard Practice for Measuring
the Dynamic Characteristics of Amusement Rides and Devices."
(h) F2291-23b "Standard Practice for Design
of Amusement Rides and Devices."
(i) F2374-22 "Standard Practice for Design,
Manufacture, Operation, and Maintenance of Inflatable Amusement
Devices."
(j) F2375-09 (2017)
"Standard Practice for Design, Manufacture, Installation and Testing of
Climbing Nets and Netting/Mesh Used in Amusement Rides, Devices, Play Areas,
and Attractions."
(k) F2376-23
"Standard Practice for Classification, Design, Manufacture, Construction, and
Operation of Water Slide Systems."
(l) F2460-19 "Standard Practice for Special
Requirements for Bumper Boats."
(m)
F2461-20a "Standard Practice for Manufacture, Construction, Operation, and
Maintenance of Aquatic Play Equipment."
(n) F2959-23a "Standard Practice for Aerial
Adventure Courses."
(o) F2960-23
"Standard Practice for Permanent Amusement Railway Ride Tracks and Related
Devices."
(p) F2974-22 "Standard
Practice for Auditing Amusement Rides and Devices."
(q) F3054-23 "Standard Practice for
Operations of Amusement Railway Rides, Devices, and Facilities."
(r) F3133-21 "Standard Practice for
Classification, Design, Manufacture, Construction, Maintenance, and Operation
of Stationary Wave Systems."
(s)
F3158-22 "Standard Practice for Patron Transportation Conveyors Used with a
Water Related Amusement Ride or Device."
(t) F3214-23 "Standard Practice for
Characterization of Fire Properties of Seating, Upholstery, and Padding
Materials for Vehicles Associated with Amusement Rides and Devices."
(u) F3559-23 "Standard Guide for ASTM F24
Standards Governing Lifecycle Management of Amusement Rides and Devices."
The above referenced F-24 Committee standards are compiled by
ASTM International in the 2024 Annual Book of ASTM Standards, Volume 15.07. A
copy of this publication or the individual standards can be obtained by
contacting ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West
Conshohocken, Pennsylvania 19428-2959; Phone (610)832-9585;
www.astm.org.
(2) National Electrical Code (NEC) Handbook,
Article 525, "Carnivals, Circuses, Fairs, and Similar Events," 2014 Edition. A
copy of this publication can be obtained by contacting the National Fire
Protection Association at 1 Batterymarch Park, Quincy, Massachusetts
02169-7471; Phone 1(800)344-3555;
www.nfpa.org.
(3) National Fire Protection Association
(NFPA), Document 101, "Life Safety Code", 2021 Edition, Paragraphs 3.3.37.9,
12.4.9, and 13.4.9, each entitled "Special Amusement Buildings" and the
corresponding provisions of Annex A. A copy of this publication can be obtained
by contacting the National Fire Protection Association at 1 Batterymarch Park,
Quincy, Massachusetts 02169-7471; Phone 1(800)344-3555;
www.nfpa.org.
(4) ASTM International Designation E543-15,
"Standard Specification for Agencies Performing Nondestructive Testing." A copy
of this publication can be obtained by contacting ASTM International, 100 Barr
Harbor Drive, P.O. Box C700, West Conshohocken, Pennsylvania 19428-2959; Phone
(610)832-9500;
www.astm.org.
(5) American Society for Nondestructive
Testing (ASNT), Recommended Practice No. SNT-TC-1A, "Personnel Qualification
and Certification in Nondestructive Testing," 2016 Edition. A copy of this
publication can be obtained by contacting the American Society For
Nondestructive Testing, 1711 Arlingate Lane, Post Office Box 28518, Columbus,
Ohio 43228-0518; phone 1(800)222-2768;
www.asnt.org.
(6) UIAA (Union Internationale des
Associations d'Alpinisme), Mountaineering and Climbing Equipment.
(a) 'Dynamic Ropes' UIAA 101, May
2016.
(b) 'Harnesses' UIAA 105, May
2014.
(c) 'Connectors/Karabiners'
UIAA 121, February 2016.
Copies of these publications may be obtained by contacting
the UIAA, Monbijouistrasse 61, Postfach, CH - 3000 Bern 23, Switzerland;
www.theuiaa.org.
(7) The National Fire Protection
Association (NFPA) 1983 Standard on Life Safety Rope and Equipment for
Emergency Services, 2012 Edition. A copy of this publication may be obtained by
contacting the NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471.
(8) Federal Motor Vehicle Safety Standard
218, section 571.218, Title 49, Code of Federal Regulations, 2011 Edition. A
copy of this publication may be obtained by contacting the Superintendent of
Documents, U.S. Government Printing Office, Washington, D.C. 20402 or the
Division of Consumer Services, Bureau of Fair Rides Inspection at 2005
Apalachee Parkway, Tallahassee, Florida 32399-6500, or may be accessed online
at
http://www.flrules.org/Gateway/reference.asp?No=Ref-08484.
