Fla. Admin. Code Ann. R. 5L-1.014 - Heat Shock Method
(1) Washing of
shellstock - Shellstock subjected to the heat shock process shall be washed
immediately prior to the heat shock operation in potable water. Washing shall
be accomplished by spraying water under pressure. Immersing shellfish for
washing purposes is prohibited. Shellstock shall be protected from
contamination prior to and during the prewash cycle.
(2) Temperature and change of dip water -
During the heat shock process the water shall be maintained at a temperature
not less than 145º F or more than 150º F. The water shall be
completely drained or removed from the heat shock tank when it becomes dirty or
at the end of each working day. An accurate indicating or recording thermometer
shall be used during the heat shock process for temperature
measurements.
(3) Time interval of
immersion - Shellstock subjected to the heat shock process shall not be
immersed in the heat shock water for periods longer than 5 minutes. An accurate
timing device shall be available and used to control the time of
immersion.
(4) Dip tank volume - At
least 8 gallons of heat shock water shall be maintained in the dip tank for
each one-half bushel container of shellstock being heat shocked.
(5) Cooling of heat shocked shellstock - Upon
removal from shock immersion water, all heat shocked shellstock shall be
subjected to an immediate cooldown with potable tap water, or ice. Heat shocked
shellstock shall be handled in a manner which prevents contamination from
reaching the shellstock and shucked product during the cooling
operation.
(6) Refrigeration of
heat shocked shellfish - Shucked meat from all shellstock which has been
subjected to the heat shock process shall be cooled to an internal temperature
of 45º F or less within 2 hours after the heat shocking process. Shucked
meats shall be immediately cooled by placing ice in shucking containers prior
to and during the shucking process.
(7) Records of heat shock time and
temperatures - Each certified shellfish processing facility operating the heat
shock process shall maintain an accurate daily record of the time and
temperature of the immersion of all lots of shellfish during each day of
operation as well as recording the time of change of heat shock water. These
records shall be maintained for at least one year.
(8) Shucker-packers may submit, for
department review and written approval, a written processing schedule together
with all validation and supporting documents for their alternative heat shock
operation. The written processing schedule must address these factors:
(a) No changes in the physical and
organoleptic properties of the species shall occur;
(b) Process shall not kill the
shellfish;
(c) No increase in
microbial deterioration of the shucked shellfish shall occur;
(d) Type and size of shellfish;
(e) Time and temperature of
exposure;
(f) Type of
process;
(g) Size of tank, tunnel
or retort;
(h) Water to shellfish
ratios in tanks; and,
(i)
Temperature and pressure monitoring devices.
(9) The written heat shock process shall be
on display in the processing area. All responsible persons involved with the
heat shock process must be aware of the requirements.
Notes
Rulemaking Authority 597.020 FS. Law Implemented 597.020 FS.
New 1-4-87, Amended 8-10-88, Formerly 16R-7.017, Amended 7-3-95, 2-6-97, Formerly 62R-7.017, Amended 8-9-00, 3-23-17.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.