Ga. Comp. R. & Regs. R. 110-2-10-.13 - Manufacturers Unit Data Plate

The manufacturer shall install on all industrialized building units a data plate, which shall contain but not be limited to the following design information:

(1) Name and address of the manufacturer

(2) Manufacturer's identification (serial) number

(3) Manufacturer's plan designation (model number/name)

(4) State insignia number(s)

(5) Occupancy classification

(6) Fire rating of exterior walls

(7) Construction classification

(8) Maximum snow load (roof live load)

(9) Maximum wind load (velocity)

(10) Seismic design category

(11) Individual thermal resistance value (R-value) of walls, roof/ceiling and floors

(12) Date of manufacture

The data plate shall be permanently mounted in a conspicuous location in the utility area or other area as approved by the Commissioner.

Notes

Ga. Comp. R. & Regs. R. 110-2-10-.13

Authority O.C.G.A. Sec. 8-2-113.

Original Rule entitled "Manufacturer's Unit Data Plate" adopted. F. Sept. 25, 2000; eff. Oct. 15, 2000. Repealed: New Rule of same title adopted. F. Mar. 4, 2003; eff. Apr. 1, 2003, as specified by the Agency. Repealed: New Rule of the same title adopted. F. Nov. 16, 2010; eff. Jan. 1, 2011, as specified by the Agency.