Ga. Comp. R. & Regs. R. 120-3-27-.12 - Assembly and Disassembly
(1) The assembly and disassembly of an
amusement ride shall be done by or under the supervision of a qualified
person.
(2) Assembly work shall be
performed in a proper and workmanlike manner. Parts shall be properly aligned
and shall not be bent, distorted, cut or otherwise injured to force a fit.
Parts requiring lubrication shall be lubricated in course of assembly.
Fastening and locking devices, such as bolts, cap screws, cotter pins and lock
washers shall be installed where required for safe operation. Nuts shall be
drawn tight, cotter pins shall be spread and lock nuts firmly set.
(3) Parts which are excessively worn or which
have been materially damaged shall not be used. Close visual inspection of
parts shall be made during assembly to discover such wear or damage and
immediate inspection of fastening devices shall be made after assembly to
assure that they have been properly installed.
(4) Persons engaged in the assembly or
disassembly of amusement rides shall be provided with and shall use tools of
proper size and design to enable the work to be done in a proper manner.
Broken, damaged and unsuitable tools shall not be used.
(5) Assembly and disassembly of amusement
rides shall be done under light conditions sufficient to permit the work to be
properly performed and inspected.
(6) A sufficient number of persons to do the
work properly shall be engaged for the assembly or disassembly of amusement
rides. Persons not so engaged shall be prevented from entering the area in
which the work may create a hazard.
(7) The owner of an amusement ride shall
comply with the manufacturer's construction manual for the assembly and
disassembly of the ride. The manufacturer's construction manual shall be kept
with the amusement ride and shall be available for use by the Safety
Engineering Section.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.