Ga. Comp. R. & Regs. R. 120-3-27-.13 - Manufacturer's Information

(1) No new amusement ride shall be placed in service unless the following information as applicable is provided to the ride owner by the manufacturer of the ride.

(2) The required information shall be legibly impressed on a metal plate or equivalent and readily visible at the appropriate ride.

(a) A manufacturer's unique serial number or code affixed to the ride in a permanent fashion;

(b) A manufacturer's unique serial number or code assigned to each manufactured ride type of the same structural design or components;

(c) The date (month, year) that the given ride met the manufacturer's required construction specifications;

(d) The maximum revolutions per minute, the maximum feet per second, or miles per hour;

(e) The capacity of the ride in terms of total passenger weight or the number of passengers;

(3) Water ride data plates shall contain a location number of the ride or flume and the maximum dispatch time interval.

(4) The ride owner shall maintain all of the information described in (2) above and make it available to the Commissioner upon his request.

(5) Where any conflict occurs between the manufacturer's information or recommendations of (2) above and other provisions of these rules, the other provisions of this Chapter shall prevail.

Notes

Ga. Comp. R. & Regs. R. 120-3-27-.13

O.C.G.A. Sec. 25-15-59.

Original Rule entitled "Manufacturer's Information "adopted. F. Sep. 4, 2013; eff. Sept. 24, 2013.