(1) General. All information required to
appear on a consumer package shall appear thereon in the English language and
shall be prominent, definite, and plain, and shall be conspicuous as to size
and style of letters and numbers and as to color of background. Any required
information that is either in hand lettering or hand script shall be entirely
clear and equal to printing in legibility.
(a) Location. The declaration or declarations
of quantity of the contents of a package shall appear on the bottom 30 percent
of the principal display panel or panels. For cylindrical containers, see also
paragraph
40-15-3-.10(6) for
additional requirements.
(b) Style
of Type or Lettering. The declarations of quantity shall be in such style of
type or lettering as to be boldly, clearly, and conspicuously presented with
respect to other type, lettering, or graphic material on the package, except
that a declaration of net quantity blown, formed, or molded on a glass or
plastic surface is permissible when all label information is blown, or molded
on the surface.
(c) Color Contrast.
The declaration or declarations of quantity shall be in a color that contrasts
conspicuously with its background, except that a declaration of net quantity
blown, formed, or molded on a glass or plastic surface shall not be required to
be presented in a contrasting color if no required label information is on the
surface in a contrasting color.
(2) Free Area. The area surrounding the
quantity declaration shall be free of printed information:
(a) above and below, by a space equal to at
least the height of the lettering in the declaration; and,
(b) to the left and right, by a space equal
to twice the width of the letter "N" of the style and size of type used in the
declaration.
(3)
Parallel Quantity Declaration. The quantity declaration shall be presented in
such a manner as to be generally parallel to the declaration of identity and to
the base on which the package rests as it is designed to be
displayed.
(4) Calculation of Area
of Principal Display Panel for Purposes of Type Size. The area of the principal
display panel shall be:
(a) in the case of a
rectangular container, one entire side which properly can be considered to be
the principal display panel, the product of the height times the width of that
side; or,
(b) in the case of a
cylindrical or nearly cylindrical container, forty percent of the product of
the height of the container times the circumference; or,
(c) in the case of any other shaped
container, 40 percent of the total surface of the container, unless such
container presents an obvious principal display panel (e.g., the top of a
triangular or circular package of cheese, or the top of a can of shoe polish),
in which event, the area shall consist of the entire such surface.
(Determination of the principal display panel shall exclude
tops, bottoms, flanges at tops and bottoms of cans, and shoulders and necks of
bottles or jars.)
(5) Minimum Height of Numbers and Letters.
The height of any letter or number in the required quantity declaration shall
be not less than that shown in Table II with respect to the area of the panel,
and the height of each number of a common fraction shall meet one-half the
minimum height standards. In the case of the symbol for milliliter, the "m"
shall meet the minimum height standard.
(6) Numbers and Letters: Proportion. No
number or letter shall be more than three times as high as it is wide.
TABLE II MINIMUM HEIGHT OF NUMBERS AND LETTERS
|
Area of principal display
panel
|
Minimum height of numbers and
letters
|
Minimum height: label information
blown, formed, or molded on surface of container
|
|
|
|
5 Square inches (in2)
and less
|
1/16 inch
|
1/8 inch
|
|
|
|
Greater than 5 square inches and not greater than
25 in2
|
1/8 inch
|
3/16 inch
|
|
|
|
Greater than 25 in2 and
not greater than 100 in2
|
3/16 inch
|
1/4 inch
|
|
|
|
Greater than 100 in2 and
not greater than 400 in2
|
1/4 inch
|
5/16 inch
|
|
|
|
Greater than 400
in2
|
1/2 inch
|
9/16 inch
|
Notes
Ga. Comp. R.
& Regs. R. 40-15-3-.08
O.C.G.A. Sec.
10-2-5(Ga. L. 1972, p.
654).
Original Rule entitled
"Prominence and Placement of Labels: Consumer Packages" was filed on
November 30, 1973; effective
December 20, 1973.
Amended: Rule repealed and a new Rule entitled
"Prominence and Placement: Consumer Packages" adopted. Filed
March 1, 1984; effective
March 21,
1984.
