Haw. Code R. § 11-265-259 - Response actions
(a) The owner or
operator of waste pile units subject to section 11-265-254 must submit a
response action plan to the director when submitting the proposed action
leakage rate under section 11-265-255. The response action plan must set forth
the actions to be taken if the action leakage rate has been exceeded. At a
minimum, the response action plan must describe the actions specified in
subsection (b).
(b) If the flow
rate into the leak determination system exceeds the action leakage rate for any
sump, the owner or operator must:
(1) Notify
the director in writing of the exceedance within 7 days of the
determination;
(2) Submit a
preliminary written assessment to the director within 14 days of the
determination, as to the amount of liquids, likely sources of liquids, possible
location, size, and cause of any leaks, and short-term actions taken and
planned;
(3) Determine to the
extent practicable the location, size, and cause of any leak;
(4) Determine whether waste receipts should
cease or be curtailed, whether any waste should be removed from the unit for
inspection, repairs, or controls, and whether or not the unit should be
closed;
(5) Determine any other
short-term and longer-term actions to be taken to mitigate or stop any leaks;
and
(6) Within 30 days after the
notification that the action leakage rate has been exceeded, submit to the
director the results of the analyses specified in paragraphs (b)(3), (4), and
(5), the results of actions taken, and actions planned. Monthly thereafter, as
long as the flow rate in the leak detection system exceeds the action leakage
rate, the owner or operator must submit to the director a report summarizing
the results of any remedial actions taken and actions planned.
(c) To make the leak and/or
remediation determinations in paragraphs (b)(3), (4), and (5), the owner or
operator must:
(1)
(i) Assess the source of liquids and amounts
of liquids by source,
(ii) Conduct
a fingerprint, hazardous constituent, or other analyses of the liquids in the
leak detection system to identify the source of liquids and possible location
of any leaks, and the hazard and mobility of the liquid; and
(iii) Assess the seriousness of any leaks in
terms of potential for escaping into the environment; or
(2) Document why such assessments are not
needed.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.