Haw. Code R. § 11-41-3 - Lead-based paint hazards
(a) Paint-lead
hazard. A paint-lead hazard is any of the following:
(1) Any lead-based paint on a friction
surface that is subject to abrasion and where the lead dust levels on the
nearest horizontal surface underneath the friction surface (e.g., the window
sill, or floor) are equal to or greater than the dust-lead hazard levels
identified in subsection (b).
(2)
Any damaged or otherwise deteriorated leadbased paint on an impact surface that
is caused by impact from a related building component (such as a door knob that
knocks into a wall or a door that knocks against its door frame).
(3) Any chewable lead-based painted surface
on which there is evidence of teeth marks.
(4) Any other deteriorated lead-based paint
in any residential building or child-occupied facility or on the exterior of
any residential building or child-occupied facility.
(b) Dust-lead hazard. A dust-lead hazard is
surface dust in a residential dwelling or child-occupied facility that contains
a mass-per-area concentration of lead equal to or exceeding ten micrograms per
square foot on floors or one hundred micrograms per square foot on interior
window sills based on wipe samples.
(c) Soil-lead hazard. A soil-lead hazard is
bare soil on residential real property or on the property of a child-occupied
facility that contains total lead equal to or exceeding four hundred parts per
million (micrograms per gram) in a play area or an average of one thousand two
hundred parts per million of bare soil in the rest of the yard based on soil
samples.
(d) Work practice
requirements. Applicable certification, occupant protection, and clearance
requirements and work practice standards are found in this chapter and in
regulations issued by the United States Department of Housing and Urban
Development (HUD) at 24 C.F.R. part 35, subpart R.
(e) The work practice standards in those
regulations do not apply when treating paint-lead hazards of less than:
(1) Two square feet of deteriorated
lead-based paint per room or equivalent;
(2) Twenty square feet of deteriorated paint
on the exterior building; or
(3)
Ten per cent of the total surface area of deteriorated paint on an interior or
exterior type of component with a small surface area.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.