Haw. Code R. § 19-147-7 - Procedures for the certification of ignition interlock devices

(a) All ignition interlock devices used pursuant to HRS chapter 291E must be approved by the director.

(b) The vendor shall arrange for the certification of the ignition interlock devices, and provide the director with the following documents:

(1) The name and address of the ignition interlock device manufacture (if the vendor is not the manufacturer).

(2) The name and model number of the ignition interlock device.

(3) A detailed description of the device including technical specifications, installation and operational instructions, and capabilities of the device.

(4) Certification from an independent laboratory that the ignition interlock device has been tested in accordance with current model specifications published by the National Highway Traffic Safety Administration, and that the ignition interlock device meets or exceeds those specifications. The certification report shall include:

(A) The name and location of the testing laboratory;

(B) The address and phone number of the testing laboratory;

(C) A description of the tests performed;

(D) Copies of the data and results of the testing procedures; and

(E) Names and qualifications of the individuals performing the tests.

(5) A notarized affidavit from the manufacturer of the device certifying that the vendor is an authorized manufacturer's representative (if the vendor is not the manufacturer).

(c) All ignition interlock devices approved by the director shall have affixed to it a warning label that reads as follows: "WARNING: Any person circumventing, tampering with, or otherwise misusing this device is guilty of a violation of law and may be subject to a fine, imprisonment or other penalty."

(1) The cost and supply of the warning labels shall be borne by the manufacturer.

(2) The manufacturer shall submit a prototype of the warning label to the director for approval.

Notes

Haw. Code R. § 19-147-7

[Eff FEB 14 2011] (Auth: HRS § 291E-6) (Imp: HRS § 291E-6)