Haw. Code R. § 6-77-30 - Yield strength (S) for steel pipe
(a) For pipe that
is manufactured in accordance with a specification listed in section I of
Appendix B, the yield strength to be used in the design formula in section
6-77-29 is the SMYS stated in the listed specification, if that value is
known.
(b) For pipe that is
manufactured in accordance with a specification not listed in section I of
Appendix B or whose specification or tensile properties are unknown, the yield
strength to be used in the design formula in section 6-77-29 is one of the
following:
(1) If the pipe is tensile tested
in accordance with section II.D. of Appendix B, the lower of the following:
(A) Eighty percent of the average yield
strength determined by the tensile tests;
(B) The lowest yield strength determined by
the tensile tests, but not more than 52,000 p.s.i.
(2) If the pipe is not tensile tested as
provided in subsection (b)(1) 24,000 p.s.i.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.