Haw. Code R. §§ 11-264.1083 - Waste determination procedures
(a) Waste
determination procedure to determine average volatile organic (VO)
concentration of a hazardous waste at the point of waste origination.
(1) An owner or operator shall determine the
average VO concentration at the point of waste origination for each hazardous
waste placed in a waste management unit exempted under the provisions of §
264.1082(c)(1) of this subpart from using air emission controls in accordance
with standards specified in §264.1084 through §264.1087 of this
subpart, as applicable to the waste management unit.
(i) An initial determination of the average
VO concentration of the waste stream shall be made before the first time any
portion of the material in the hazardous waste stream is placed in a waste
management unit exempted under the provisions of § 264.1082(c)(1) of this
subpart from using air emission controls, and thereafter an initial
determination of the average VO concentration of the waste stream shall be made
for each averaging period that a hazardous waste is managed in the unit; and
(ii) Perform a new waste
determination whenever changes to the source generating the waste stream are
reasonably likely to cause the average VO concentration of the hazardous waste
to increase to a level that is equal to or greater than the applicable VO
concentration limits specified in § 264.1082 of this subpart.
(2) For a waste determination that
is required by paragraph (a)(1) of this section, the average VO concentration
of a hazardous waste at the point of waste origination shall be determined in
accordance with the procedures specified in
40 CFR
265.1084(a)(2) through
(a)(4).
(b) Waste determination procedures for
treated hazardous waste.
(1) An owner or
operator shall perform the applicable waste determinations for each treated
hazardous waste placed in waste management units exempted under the provisions
of §264.1082(c)(2)(i) through (c)(2)(vi) of this subpart from using air
emission controls in accordance with standards specified in
§§264.1084 through 264.1087 of this subpart, as applicable to the
waste management unit.
(i) An initial
determination of the average VO concentration of the waste stream shall be made
before the first time any portion of the material in the treated waste stream
is placed in the exempt waste management unit, and thereafter update the
information used for the waste determination at least once every 12 months
following the date of the initial waste determination; and
(ii) Perform a new waste determination
whenever changes to the process generating or treating the waste stream are
reasonably likely to cause the average VO concentration of the hazardous waste
to increase to a level such that the applicable treatment conditions specified
in §264.1082 (c)(2) of this subpart are not achieved.
(2) The waste determination for a treated
hazardous waste shall be performed in accordance with the procedures specified
in 40 CFR
265.1084 (b)(2) through
(b)(9), as applicable to the treated
hazardous waste.
(c)
Procedure to determine the maximum organic vapor pressure of a hazardous waste
in a tank.
(1) An owner or operator shall
determine the maximum organic vapor pressure for each hazardous waste placed in
a tank using Tank Level 1 controls in accordance with standards specified in
§264.1084(c) of this subpart.
(2) The maximum organic vapor pressure of the
hazardous waste may be determined in accordance with the procedures specified
in 40 CFR
265.1084 (c)(2) through
(c)(4).
(d) The procedure for determining no
detectable organic emissions for the purpose of complying with this subpart
shall be conducted in accordance with the procedures specified in
40 CFR
265.1084(d).
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.