Haw. Code R. §§ 11-264.259 - Special requirements for hazardous wastes F020, F021, F022, F023, F026, and F027
(a) Hazardous Wastes F020, F021, F022, F023,
F026, and F027 must not be placed in waste piles that are not enclosed (as
defined in § 264.250(c)) unless the owner or operator operates the waste
pile in accordance with a management plan for these wastes that is approved by
the director pursuant to the standards set out in this paragraph, and in accord
with all other applicable requirements of this part. The factors to be
considered are:
(1) The volume, physical, and
chemical characteristics of the wastes, including their potential to migrate
through soil or to volatilize or escape into the atmosphere;
(2) The attenuative properties of underlying
and surrounding soils or other materials;
(3) The mobilizing properties of other
materials co-disposed with these wastes; and
(4) The effectiveness of additional
treatment, design, or monitoring techniques.
(b) The director may determine that
additional design, operating, and monitoring requirements are necessary for
piles managing hazardous wastes F020, F021, F022, F023, F026, and F027 in order
to reduce the possibility of migration of these wastes to ground water, surface
water, or air so as to protect human health and the
environment.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.