Ill. Admin. Code tit. 35, § 725.294 - General Operating Requirements
a) Hazardous wastes or treatment reagents
must not be placed in a tank system if they could cause the tank, its ancillary
equipment or the secondary containment system to rupture, leak, corrode, or
otherwise fail.
b) The owner or
operator must use appropriate controls and practices to prevent spills and
overflows from tank or secondary containment systems. These include the
following, at a minimum:
1) Spill prevention
controls (e.g., check valves, dry disconnect couplings, etc.);
2) Overfill prevention controls (e.g., level
sensing devices, high level alarms, automatic feed cutoff, or bypass to a
standby tank); and
3) Maintenance
of sufficient freeboard in uncovered tanks to prevent overtopping by wave or
wind action or by precipitation.
c) The owner or operator must comply with the
requirements of Section
725.296
if a leak or spill occurs in the tank system.
Notes
Amended at 29 Ill. Reg. 6389, effective April 22, 2005
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.