Ill. Admin. Code tit. 77, § 845.275 - Safe Work Practices
a) Lead
abatement may employ methodologies specified in Section
845.15, including:
1) Replacement of any part of a building with
a lead-free component.
2) Removal
of any part of a building using the following techniques:
A) Off-site chemical stripping;
B) Heat guns operating at temperatures not
exceeding 1100° F. If using heat guns, the lead abatement contractor shall
ensure that a minimum of one fire extinguisher for each heat gun being used is
supplied;
C) Non-flammable chemical
strippers that do not contain methylene chloride;
D) Sander equipped with HEPA vacuum
attachment;
E) Wet planing to
substrate;
F) Contained vacuum
blasting in exterior work areas only;
G) Contained hydro-blasting in exterior work
areas only; and
H) Mechanical paint
removal systems equipped with a HEPA vacuum attachment.
3) Enclosure of a lead-bearing substance may
be achieved by covering the lead-bearing surface with an approved material.
Materials used shall comply with local building ordinances or codes and shall
be applied in accordance with methodologies outlined in Section
845.15. Materials approved for
enclosure include:
A) Gypsum board;
B) Fiberglass mats;
C) Canvas-backed vinyl wall
coverings;
D) High pressure
laminated plastic sheeting;
E)
Tile;
F) Paneling;
G) Vinyl;
H) Wood;
I) Aluminum;
J) Stone; or
K) Other durable material that does not
readily tear or peel.
4)
Encapsulation of a lead-bearing substance may be achieved by applying an
encapsulating product in accordance with the manufacturer's directions and
shall be applied in accordance with methodologies specified in Section
845.15.
b) Lead mitigation may employ interim lead
hazard control work practices, including:
1)
Procedures identified as interim controls outlined in the methodologies
incorporated in Section
845.15;
2) The methods outlined in subsection (a)
that are not permanent;
3) Paint
film stabilization;
4) Friction and
impact surface treatment; and
5)
Dust removal and control.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.