Ill. Admin. Code tit. 92, § 442.285 - Stop Signal Arm Panel
a) A stop
signal arm panel must be installed on the left side of the bus that conforms to
49 CFR
571.131. Decals may be used in lieu of
painting. Strobe lamps are acceptable on stop signal arm panels. See Appendix E
for example.
b) Additional stop
signal arm panels may be added at the purchaser's request. Additional panels
must be located on the left side of the bus. Additional panels must operate in
conjunction with the required panel and meet all stop arm panel requirements
except as follows. The additional panel must not contain any marking or
reflective material on the front side of the panel. The additional panel must
be located in the rear half of the bus adjacent to the rearmost
window.
Notes
Amended at 31 Ill. Reg. 8238, effective May 25, 2007
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.