Iowa Admin. Code r. 571-46.10 - Procedures for application and for issuance of a vehicle identification number (VIN) for homebuilt regulated vehicles
(1) A person, other than a manufacturer, who
constructs or rebuilds a regulated vehicle for which there is no legible VIN
may make application to the department on forms provided by the department for
the issuance of a new VIN. The application process shall include an inspection
of the regulated vehicle by the department. If the application is approved, the
VIN shall be affixed to the vehicle by a peace officer. The completed
application shall then be surrendered to the county recorder.
(2) The peace officer shall permanently affix
the VIN as follows:
a.
All-terrain
vehicle. The VIN shall be affixed to the frame under the
seat.
b.
Off-road
motorcycle. The VIN shall be affixed to the steering yoke.
c.
Off-road utility vehicle.
The VIN shall be affixed to the frame under the seat.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
(1) A person, other than a manufacturer , who constructs or rebuilds a regulated vehicle for which there is no legible VIN may make application to the department on DNR Form 542-8065 for the issuance of a new VIN. The application process shall include an inspection of the regulated vehicle by the department . If the application is approved, the VIN shall be affixed to the vehicle by a conservation officer. The completed application shall then be surrendered to the county recorder.
(2) The conservation officer shall permanently affix the VIN as follows:
a. All-terrain vehicle . The VIN shall be affixed to the frame under the seat.
b. Off-road motorcycle . The VIN shall be affixed to the steering yoke.
c. Off-road utility vehicle . The VIN shall be affixed to the frame under the seat.
[ARC 8878B, IAB 6/30/10, effective 8/4/10]