Iowa Admin. Code r. 761-425.72 - Demonstration permits
(1)
Demonstration permits may be issued by motor vehicle dealers to permit the use
of dealer plates for the purpose of demonstrating the load capabilities of
motor trucks and truck tractors. A demonstration permit must be issued on a
form prescribed by the department.
(2) The dealer shall complete the permit. The
information to be filled out includes, but is not limited to, the following:
a. Date of issuance by the dealer, date of
expiration, and the specific dates for which the permit is valid. The
expiration date shall be five days or less from the date of issuance.
b. Dealer's name, address and license
number.
c. Name(s) of the
prospective buyer(s) and all prospective drivers.
d. Route of the demonstration trip. The
points of origin and destination shall be the dealership. The permit is not
valid for a route outside Iowa.
e.
The make, year and vehicle identification number of the motor vehicle being
demonstrated.
(3) The
permit shall at all times be carried in the motor vehicle to which it refers
and shall be shown to any peace officer upon request.
(4) Only one demonstration permit per motor
vehicle shall be issued for a prospective buyer.
(5) The demonstration permit is valid only
for a movement that does not exceed the legal length, width, height and weight
restrictions. The permit is not valid for an overdimensional or overweight
movement.
(6) A dealer plate issued
under Iowa Code section
321.60 for the purpose of
hauling a load or towing a trailer may be used in lieu of a demonstration
permit.
This rule is intended to implement Iowa Code sections 321.57 to 321.63.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.