Kan. Admin. Regs. § 28-16-5 - Engineer's report
A comprehensive report of the proposed work, written or approved by the consulting or designing engineer, must accompany all plans for a complete system or treatment plant, and must give all data upon which the design is based, such as information concerning sewer systems:
(A) The nature and extent of the area
included with the present system of sewerage, and of the area which it is
planned shall drain into this system ultimately.
(B) Population to be served, present and
future, estimated for twenty-five years.
(C) The estimated daily per capita flow of
sewage, and the total and per capita water consumption of the town at the
present time.
(D) The allowance
made for infiltration.
(E) The
estimated daily flow of sewage.
(F) The character of the sewage. If domestic
and trade wastes, estimate nature, and approximate quantity of each.
(G) Method of flushing or cleaning sewers.
(H) Portion to be built at present
time.
(I) Minimum and maximum
grade of sewers of each size.
(J)
If there are sections which cannot grade into this system, the extent of such
sections and the probable future disposition of sewage from these sections.
(K) Distance of houses or
buildings from proposed outlet or treatment plant.
(L) Approximate maximum and minimum flow of
water in stream receiving flow of sewage.
(M) Drainage area above outlet or treatment
plant.
(N) Nearest water supplies
taken from stream below plant or outlet; above plant or outlet. Dams in
vicinity of plant or outlet.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.