Kan. Admin. Regs. § 28-19-729b - Hospital/medical/infectious waste incinerators; emission standards
(a)
(1) The owner or operator of a
"hospital/medical/infectious waste incinerator," or HMIWI, subject to these
HMIWI regulations shall not cause or permit emissions from the HMIWI to exceed
a visible contaminant emission greater than 10 percent opacity during a
six-minute block average, measured as specified in
40 C.F.R.
60.56c as adopted in K.A.R. 28-19-729g.
(2) The owner or operator of any
HMIWI subject to these regulations shall not cause or permit emissions from the
HMIWI of any pollutants to exceed the emission limits listed in Table 1 of this
regulation, measured as specified in
40 C.F.R.
60.56c, as adopted in K.A.R. 28-19-729g.
For Table see Agency.
(b) Exceptions. Air emissions opacity levels
that exceed the specified limits in paragraph (a)(1) of this regulation shall
not be considered a violation of this regulation if the owner or operator of
the emission unit demonstrates to the satisfaction of the department that the
opacity exceedence is due solely to the presence of uncombined water in the
plume.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.