Kan. Admin. Regs. § 49-47-2 - Application of state serial numbers
(a) Upon
completion of the installation of a new boiler or pressure vessel or at the
time of the initial certificate inspection of an existing installation, each
boiler or pressure vessel shall be stamped by the inspector with a serial
number of the state or affixed with a one-inch by four-inch,
corrosion-resistant metal tag with the serial number of the state, consisting
of letters and figures to be not less than 516 inch in height and arranged as
follows:
High Pressure KS 1,000
Low Pressure KS 1,000 H
Pressure Vessels KS 1,000 U
Antique Hobby KS 1,000 A
(b) All cast iron and low pressure heating
boilers or pressure vessels shall have securely attached to the casing, water
column, or gauge or other appliance of the boiler or pressure vessel, a
corrosion-resistant metal tag on which is stamped the serial number of the
state. The tag shall be not less than one inch by four inches in size.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.