Kan. Admin. Regs. § 49-52-14 - Repairs and renewals of fittings and appliances
(a) If repairs
are made to fittings or appliances or if it becomes necessary to replace them,
the repairs shall meet the following standards:
(1) Sections I, IV, and VIII of the ASME code
for new construction, as adopted in K.A.R. 49-45-1, K.A.R. 49-45-5, K.A.R.
49-45-29, K.A.R. 49-45-30, and K.A.R. 49-45-31 ;
(2) ASME CSD-1, as adopted in K.A.R.
49-45-27 ;
(3) NFPA 85, 85A, 85F,
and 86, as adopted in K.A.R. 49-45-37 through 49-45-40 ; and
(4) the national board inspection code, as
adopted in K.A.R. 49-45-20 .
(b) Each electrical control and each safety
device shall bear a label and shall be listed by a nationally recognized
agency, including UL (underwriters laboratories), FM (factory mutual), or AGA
(American gas association), and shall bear an identification label from one of
these agencies.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.