Kan. Admin. Regs. § 99-30-5 - Removal of rejection tags
(a) For
the purpose of testing or repairing a scale, any licensed scale testing and
service company may remove an official rejection tag or other mark placed on a
scale by authority of the secretary.
(b) After the test is conducted and necessary
repairs are completed, the scale testing and service company shall place the
scale in service. If the scale is not repaired properly, the scale testing and
service company shall replace the rejection tag or other mark with a substitute
rejection tag or other mark supplied by the secretary.
(c) After removing an official rejection tag
for the purpose of repairing a scale, the scale testing and service company
shall send a completed inspection or test report and the official rejection tag
to the weights and measures office within 10 days after the date of removing
the official rejection tag. The completed inspection or test report may be
submitted by facsimile. The inspection or test report or other attached
document shall detail all repairs made, and the testing shall be conducted to
ensure that the scale is in compliance with Kansas law and K.A.R. 99-25-1.
(d) Any licensed scale testing and
service company may file reports required by this regulation by means of
facsimile. If the reports are sent to the weights and measures office by
facsimile, the original shall be mailed to the weights and measures office
within 10 days after the date of the test or inspection. Notifications mailed
to the administrator shall be considered timely if they are postmarked on or
before the 10th day following the calibration, repair, or adjustment described
in the notification.
(e) This
regulation shall apply to new and used scales.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.