Mich. Admin. Code R. 325.52901 - Scope, adoption and availability of standards
Rule 1.
(1)
These rules are intended to provide, in, about or around places of employment,
reasonable safety and health to persons involved in welding, cutting, brazing,
soldering and acetylene generating and to those exposed to these processes and
the equipment and compressed gases used.
(2) The federal Occupational Safety and
Health Administration (OSHA) regulations
29
CFR 1910.251(a) "Welder and
welding operator" as amended December 14, 2007, are adopted by reference in
these rules.
(3) The following
rules contained in federal OSHA regulations
29 CFR
1910.252 "Welding, Cutting, and Brazing,
General requirements," as amended March 26, 2012, are adopted by reference in
these rules:
(a) 1910.252(b)(4)(i) to (ii)
"Work in confined spaces."
(b)
1910.252(c)(1)(i) to (vi) "General."
(c) 1910.252(c)(2)(i) to (ii) "Ventilation
for general welding and cutting."
(d) 1910.252(c)(3)(i) to (ii) "Local exhaust
hoods and booths."
(e)
1910.252(c)(4)(i) to (v) "Ventilation in confined spaces."
(f) 1910.252(c)(5)(i) to (ii) "Fluorine
compounds."
(g) 1910.252(c)(6)(i)
to (ii) "Zinc."
(h)
1910.252(c)(7)(i) to (iii) "Lead."
(i) 1910.252(c)(8) "Beryllium."
(j) 1910.252(c)(9)(i) to (ii)
"Cadmium."
(k) 1910.252(c)(10)
"Mercury."
(l) 1910.252(c)(11)(i)
to (ii) "Cleaning compounds."
(m)
1910.252(c)(12) "Cutting of stainless steels."
(n) 1910.252(c)(13) "First-aid
equipment."
(o) 1910.252(d)(1)(i)
to (ii) "Industrial applications."
(p) 1910.252(d)(1)(vii) "X-ray
inspection ."
(q) 1910.252(d)(2)(i)
to (ii) "Mechanical piping systems."
(4) The federal OSHA regulations
29 CFR
1910.254(d)(1) "Operation
and maintenance General," as amended September 13, 2005, are adopted by
reference in these rules.
(5) The
federal OSHA regulations
29 CFR
1910.255(d)(1) "Ventilation
and flash guard," as amended April 11, 1990, are adopted by reference in these
rules.
(6) A reference to
29 CFR
1910.132 and
1910.133
means General Industry Safety and Health Standard Part 33. "Personal Protective
Equipment ."
(7) A reference to 29
CFR part 1910 subpart Q, 1910.252(a) and (b), 1910.253, and 1910.254 means
General Industry Safety Standard Part 12. "Welding and Cutting."
(8) A reference to
29 CFR 1910.1000
means Occupational Health Standard Part 301. "Air Contaminants for General
Industry."
(9) A reference to
29 CFR
1910.1200 means Occupational Health Standard
Part 430. "Hazard Communication."
(10) The adopted federal regulations have the
same force and effect as a rule promulgated under the Michigan occupational
safety and health act , 1974 PA 154, MCL 408.1001 to 408.1094.
(11) The OSHA regulations adopted in these
rules are available from the United States Department of Labor, Occupational
Safety and Health Administration website, www.osha.gov, at no charge , as of the time of
adoption of these rules.
(12) The
regulations adopted in these rules are available for inspection at the
Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services
Section, 530 West Allegan Street, P.O. Box 30643, Lansing, Michigan,
48909-8143.
(13) The regulations
adopted in these rules may be obtained from the publisher or the Department of
Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West
Allegan Street, P.O. Box 30643, Lansing, Michigan, 48909-8143, at the cost
charged in this rule, plus $20.00 for shipping and handling.
(14) The following Michigan Occupational
Safety and Health Administration (MIOSHA) standards are referenced in these
rules. Up to 5 copies of these standards may be obtained at no charge from the
Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services
Section, 530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, 48909-8143
or via the internet at the following website:
www.michigan.gov/mioshastandards.
For quantities greater than 5, the cost, at the time of adoption of these
rules, is 4 cents per page.
(c) General Industry Safety and Health
Standard Part 33. "Personal Protective Equipment ,"
R
408.13301 to
R
408.13398.
(d) Occupational Health Standard Part 301.
"Air Contaminants for General Industry,"
R
325.51101 to
R
325.51107.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.