Mich. Admin. Code R. 325.99403 - Lead inspection
Rule 403.
(1) Only
a person certified by the department as an inspector or risk assessor shall
conduct an inspection. The inspector or risk assessor shall conduct the
inspection according to this rule.
(2) When conducting an inspection, an
inspector or risk assessor shall select the following locations according to
documented methodologies and shall test the locations for the presence of
lead-based paint:
(a) Each interior and
exterior component that has a distinct painting history, except for components
that the inspector or risk assessor determines have been replaced after 1978 or
do not contain lead-based paint.
(b) In a multifamily dwelling or
child-occupied facility, each component that has a distinct painting history,
and in every common area, except for components that the inspector or risk
assessor determines have been replaced after 1978 or do not contain lead-based
paint.
(3) The certified
inspector or risk assessor shall prepare an inspection report for each
inspection. The report shall be specific to the structure tested and include
all of the following information:
(a) Table of
contents.
(b) A plain-language
conclusions section, designed to provide easy identification of all lead
hazards, shall be positioned prominently near the front of the report. Results
included in the conclusions section shall not be used to satisfy requirements
for presentation of results described elsewhere in this rule. The conclusions
section shall contain all of the following information in tabular format:
(i) Results of any environmental sampling
that denote a positive indication of lead paint, grouped by sample
methodology.
(ii) Applicable
comparison standards.
(iii) Units
of measurement.
(iv) A stand-alone
description of each sampling location and component.
(c) Date of each inspection.
(d) Address of building.
(e) Date of construction.
(f) Apartment numbers, if
applicable.
(g) Name, address, and
telephone number of the owner or owners.
(h) Name, signature, and certification number
of each certified inspector or risk assessor, or both, conducting
testing.
(i) Name, address, and
telephone number of the certified person employing each inspector or risk
assessor, or both, if applicable.
(j) Each testing method and device and
sampling procedure employed for paint analysis, including quality control data
and, if used, the serial number of any X-ray fluorescence device.
(k) Specific locations of each painted
component tested for the presence of lead-based paint.
(l) The results of the inspection expressed
in terms appropriate to the sampling method used.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.