Mich. Admin. Code R. 408.11211 - Employer and employee responsibilities
Rule 1211.
(1)
An employer shall do all of the following:
(a)
Give each employee training or a test before allowing him or her to use
equipment for arc and gas welding and cutting.
(b) Provide face and eye protection and foot
protection as prescribed in general industry safety standard Part 33 "Personal
Protective Equipment," as referenced in
R
408.11202.
(c) Provide other personal protective
clothing or equipment, such as gloves, aprons, hearing protection devices,
respirators, lifelines, safety belts, and lanyards required to protect the
employee from injury likely to be caused by the assigned task of welding and
cutting. Except for long sleeve shirts required to protect the employee from
ultraviolet rays to the arms and ankle length trousers, the personal protective
clothing and equipment shall be provided without expense to the
employee.
(d) Provide to an
employee, at no expense to the employee, protective devices such as, but not
limited to, curtains, safety glasses, or face shields to reduce the risk of
flash burn, sparks, and foreign bodies to all employees in the area.
(e) Provide ventilation where necessary to
protect an employee against toxic materials as prescribed by the Michigan
Occupational Safety and Health Administration (MIOSHA) standards.
(2) An employee shall comply with
all of the following:
(a) Use welding and
cutting equipment as trained and authorized.
(b) Use the protective equipment required by
the employer or the hazard.
(c) Not
tamper with safety devices.
(3) An employee in charge of the operation of
oxygen or fuel-gas supply equipment, of oxygen or fuel-gas systems, including
generators, shall be instructed and judged competent by the employer for this
work before being left in charge. Rules and instructions covering the operation
and maintenance of oxygen or fuel-gas supply equipment, including generators,
and oxygen or fuel-gas distribution piping systems shall be readily
available.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.