Mich. Admin. Code R. 408.12239 - Lift platforms
Rule 2239.
(1)
An employee shall not be lifted by a fork-lift tractor, except when a platform
is attached to the forks by enclosed sleeves and a safety chain, or other
mechanical device, in such a manner that the platform cannot tip or
slip.
(2) A platform shall be
equipped with a top railing approximately 42 inches high, an intermediate rail,
and a toeboard. The railing shall consist of 1 of the following materials:
(a) Wood posts of at least 2 x 4 inches
nominal stock, the top rail shall be made of 2 right angle pieces of not less
than 1 x 4 inch nominal stock and an intermediate rail of 1 x 4 inch nominal
stock.
(b) Steel or aluminum pipe
posts and rails with an inside diameter of not less than 1 inch and an
intermediate rail of 3/4-inch inside-diameter pipe.
(c) Structural steel or aluminum posts,
rails, and intermediate rails of angle iron of not less than 1 x 1 x 3/16 inch
size, or other shapes of equal strength.
(3) The toeboard shall be made of not less
than 1 inch x 4 inch nominal wood stock or a material of equal
strength.
(4) The intermediate rail
may be omitted from 1 side if necessary to perform the work.
(5) Any pinch point or shear point on the
lifting mechanism to which an employee on the lift platform is exposed shall be
guarded.
(6) An employee shall not
be transported in a front-end loader bucket.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.