Mich. Admin. Code R. 408.12334 - Pull-out devices
Rule 2334.
(1)
A pull-out device shall include attachments for the operator's hands or arms.
The attachments shall be connected to the slide or upper die of the press so
that the operator's hands or fingers are removed from the point of operation as
the slide descends.
(2) Authorized
personnel shall be trained and shall be responsible for proper adjustment of
the device for each die setup and operator change.
They shall make periodic inspections to determine condition of worn and broken parts which shall be replaced before permitting operation.
(3) If more than
1 operator is required on a press, a set of pull-out devices shall be provided
for each operator.
(4) Each
pull-out device in use shall be visually inspected and checked for proper
adjustment at the start of each operator shift, following a new die set-up, and
when operators are changed. Necessary maintenance or repair, or both, shall be
performed and completed before the press is operated. Records of maintenance
shall be kept pursuant to
R
408.12373.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.