Mich. Admin. Code R. 408.13874 - Power levels
Rule 3874.
(1)
The power level for cased or caseless loads shall be identified by a color and
numbering system as prescribed in table 2, except that caseless loads are
limited to power levels 1 to 6. The combination of the case color and load
color shall designate the load level. Both the explosive load and the carton or
box shall provide visual indication of the load level.
(2) Studs or other fasteners used in a
powder-actuated tool shall be only those specifically manufactured for use in
such tools.
(3) Table 2 reads as
follows:
TABLE 2
| Power Level | Case Color | Load Color | Nominal Velocity (+,- 45 fps) |
| 1 | Brass | Gray | 300 |
| 2 | Brass | Brown | 390 |
| 3 | Brass | Green | 480 |
| 4 | Brass | Yellow | 570 |
| 5 | Brass | Red | 660 |
| 6 | Brass | Purple | 750 |
| 7 | Nickel | Gray | 840 |
| 8 | Nickel | Brown | 930 |
| 9 | Nickel | Green | 1020 |
| 10 | Nickel | Yellow | 1110 |
| 11 | Nickel | Red | 1200 |
| 12 | Nickel | Purple | 1290 |
Notes
The nominal velocity applies to 3/8-inch diameter 350-grain ballistic slug fired in a test device and has no reference to actual velocity developed in any specific size or type of tool
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.