Mich. Admin. Code R. 408.17251 - Automotive lift; adoption by reference; auxiliary support device; permanent tag; lifting more than rated capacity prohibited
Rule 7 251.
(1) An automotive lift installed, or the
modification made, after the effective date of this subrule, shall be as
prescribed in sections 2, 3, and 5, except paragraph 5.7, of the ANSI Standard,
B153.1-1974, Safety Requirements for the Construction, Care and Use of
Automotive Lifts, which is incorporated herein by reference and may be
inspected at the Lansing office of the department of licensing and regulatory
affairs. This standard may be purchased at a cost of $20.00 from IHS Global, 15
Inverness Way East, Englewood, Colorado, 80112, USA, telephone number:
1-800-854-7179 or via the internet at website: http://global.ihs.com [File Link
Not Available].
(2) When an
employee is required to work underneath a vehicle supported by a hydraulic
lift, installed before the effective date of this part, the lift shall be used
only when an auxiliary support device is engaged and capable of supporting the
rated capacity of the lift.
(3) An
automotive lift purchased after December 28, 1974, shall have affixed to it a
permanent tag showing the name of the manufacturer, model number, serial
number, and rated capacity.
(4) An
automotive lift purchased before December 28, 1974, shall be equipped with a
permanent tag showing the name of the manufacturer and its rated capacity.
Where this information is not available, an outside source knowledgeable in
automotive lifts shall be used to determine the rated capacity. The capacity
shall be permanently labeled on the lift.
(5) An automotive lift shall not be used to
lift more than its rated capacity.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.