Mich. Admin. Code R. 408.18172 - Carton wrapping machines
Rule 8172.
(1)
An electric sealing heater on a carton wrapping machine shall be as prescribed
in
R
408.18171(1).
(2) A hot metal glue pot for a carton
wrapping machine shall have the heated surfaces insulated or guarded to prevent
burns from accidental contact.
(3)
The in-running nip points of power driven rolls shall be guarded.
(4) Pusher bars and pusher fingers of a
carton wrapping machine which create a hazard for an employee shall be guarded
by a barrier or enclosure.
(5) An
end-seal drum on a carton wrapping machine shall be guarded at the pinch point
and point of operation.
(6) An
access cover or door on a carton wrapping machine shall be interlocked as
prescribed in
R
408.18151(3).
(7) Where more than 1 operator is feeding a
carton wrapping machine, each operator shall be provided controls prescribed in
R
408.18115(5).
(8) Where a safety switch is used to detect
jams of product flow on a carton wrapping machine, the machine shall have a
manual reset to prevent automatic restarting when the jam has been
cleared.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.