Mich. Admin. Code R. 408.30544c - Polyethylene plastic
Rule 544c.
Sections P2906.3.1, P2906.10.1, P3003.11.1 and P3003.12.1 of the code are amended to read as follows:
P2906.3.1. Heat-fusion joints. Joint surfaces
shall be clean and free from moisture. Joint surfaces shall be heated to
melting temperature and joined. The joint shall be undisturbed until cool.
Joints shall be made in accordance with ASTM F 2620 and the manufacturers
instructions.
P2906.10.1.
Heat-fusion joints. Heat fusion joints for polypropylene pipe and tubing joints
shall be installed with socket-type heat-fused polypropylene fittings,
butt-fusion polypropylene fittings, or electrofusion polypropylene fittings.
Joint surfaces shall be clean and free from moisture. The joint shall be
undisturbed until cool. Joints shall be made in accordance with ASTM D 2657 and
the manufacturers instructions.
P3003.11.1. Heat-fusion joints. Heat-fusion
joints for polyolefin pipe and tubing joints shall be installed with
socket-type heat-fused polyolefin fittings or electrofusion polyolefin
fittings. Joint surfaces shall be clean and free from moisture. The joint shall
be undisturbed until cool. Joints shall be made in accordance with ASTM D 2657,
ASTM F 1290, or CSA B181.3, and the manufacturers instructions.
P3003.12.1. Heat-fusion joints. Joint
surfaces shall be clean and free from moisture. All joint surfaces shall be
cut, heated to melting temperature, and joined using tools specifically
designed for the operation. Joints shall be undisturbed until cool. Joints
shall be made in accordance with ASTM F 2620 and the manufacturers
instructions.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.