Mich. Admin. Code R. 408.30801 - National electrical code; adoptions by reference; inspection; purchase
Rule 801
(1)
The standards contained in the national electrical code 2023 second printing
edition, including TIA 70-23-1 to 70-23-13, Errata 70-23-1 to 70-23-6, and
Annex H, except sections 80.2, 80.5, 80.15, 80.23, 80.27, 80.29, 80.31, 80.33,
80.35, and 90.6, as published by the national fire protection association
(NFPA ), shall govern the installation , replacement, alteration , relocation, and
use of electrical systems or material. With the exceptions noted, the national
electrical code is adopted in these rules by reference.
(2) All references to the ANSI /ASME A17.1
2016, safety code for elevators and escalators mean the Michigan elevator code
and all references to the national electrical code mean the Michigan electrical
code .
(3) NFPA 110, standard for
emergency and standby power systems, 2019 edition and NFPA 111, standard on
stored electrical energy emergency and standby power systems, 2019 edition, are
adopted by reference in these rules .
(4) The codes are available for inspection at
the Lansing office of the Michigan Department of Licensing and Regulatory
Affairs, Bureau of Construction Codes, 611 West Ottawa Street, First Floor
Ottawa Building , Lansing, Michigan 48933.
(5) The National Electrical Code , NFPA 110
and NFPA 111 may be purchased from the National Fire Protection Association, 1
Batterymarch Park, Quincy, Massachusetts 02169, or through the bureau 's website
at www.michigan.gov/bcc, at a cost as
of the time of adoption of these rules of $153.00 for the National Electrical
Code , $149.00 for the NFPA 110, and $149.00 for the NFPA 111 each,
respectively.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.