Mich. Admin. Code R. 408.31152 - General requirements; building systems

Rule 1152.

(1) Building systems, including all plans, specifications, and other documentation shall be submitted in 3 copies.

(2) Building systems shall be submitted in the form prescribed by the commission and shall be accompanied by all required fees.

(3) All documents submitted with the application shall be identified to indicate the manufacturer's name, office address, and the address of the manufacturing facility.

(4) Manufacturers shall submit plans showing all elements relating to specific systems on properly identifiable sheets.

(5) All work to be performed on-site, including connection of all systems, equipment, and appliances, shall be identified and distinguished from work to be performed in the manufacturing facility.

(6) A 1 1/2 inch x 2 1/2 inch blank rectangular space shall be provided after possible reduction in print size on all sheets of plans as near as possible to the title box for the commission's stamp of approval.

(7) Grade, quality, and identification of all materials shall be specified.

(8) Design calculations and test reports shall be submitted when required.

(9) Drawings shall be drawn to scale.

(10) Drawings shall indicate the location of the approved label and data plate.

(11) Drawings shall be dated and identified. The number of sheets in each set shall be indicated.

(12) All plans, computations, and specifications, shall be prepared by, or under the direct supervision of, a registered architect or engineer and bear that architect's or engineer's signature and seal as required by, and in accordance with, Act No. 299 of the Public Acts of 1980, as amended, being S339.101 et seq. of the Michigan Compiled Laws, and known as the occupational code, and as administered by the department of licensing and regulation.

Notes

Mich. Admin. Code R. 408.31152

1979 AC; 1984 AACS