Mich. Admin. Code R. 408.40833 - Slings
Rule 833.
(1)
All slings used to store or handle material for construction operations shall
meet the requirements of General Industry Safety Standard Part 49 "Slings," as
referenced in
R
408.40810.
(2) Employers shall ensure that rigging
equipment complies with all of the following:
(a) Have permanently affixed and legible
identification markings as prescribed by the manufacturer that indicate the
recommended safe working load.
(b)
Not be loaded in excess of its recommended safe working load as prescribed on
the identification markings by the manufacturer.
(c) Not be used without affixed, legible
identification markings, required by subdivision (a) of this subrule.
(3) Employers shall not use
improved plow-steel wire rope and wire-rope slings with loads in excess of the
rated capacities, such as working load limits, indicated on the sling by
permanently affixed and legible identification markings prescribed by the
manufacturer.
(4) Wire rope slings
shall have permanently affixed, legible identification markings stating size,
rated capacity for the type or types of hitch or hitches used and the angle
upon which it is based, and the number of legs if more than 1 leg.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.