Mich. Admin. Code R. 560.111 - Contents of plat legends
Rule 111.
(1) The
purpose of this rule is to prescribe the contents of the legend.
(2) The surveyor shall place a legend on each
drawing sheet of the plat which shall contain the following:
(a) A statement that the dimensions are in
feet.
(b) A statement that the
curvilinear measurements are arc or chord distances, as the case may
be.
(c) A statement concerning the
bearings, in accordance with the act. The bearings shall be referenced to 1 of
the following:
(i) Michigan department of
transportation right-of-way map sheet number and county name.
(ii) County road commission plans - provide
project number and plan number in legend.
(iii) A recorded subdivision.
(iv) A recorded condominium. If a recorded
condominium is used as a bearing reference or the plat abuts a recorded
condominium, a copy of the recorded survey plan for the condominium shall be
submitted with the final plat.
(v)
MCS 83 coordinates, when state plane coordinates are shown on a final plat, the
coordinates shall be reported at each government corner shown. A second control
station and the combined scale factor (combined factor that is used to compute
ground distance to grid distance or vice versa) shall be reported, in addition
to the reporting requirements of 1964 PA 9, MCL 54.231 to 54.239.
(vi) Celestial observation.
(d) The symbol "o" for set
concrete monuments.
(e) A
description of all concrete monuments and all lot markers.
(f) R=radial. Lines not marked are
non-radial.
(g) Found concrete
monuments are indicated by ".". Describe the visible portion of the monument,
if more than 1 type, describe on the drawing.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.